1) 16-zone (8 wireless and 8 wired) with 4 x 4 keyboard and lattice LCD display
2) Voice pre-recorded
3) 8 partitions can be programmed independently; 8 remote controllers and 8
user codes can be programmed for 8 partition to ARM/DISARM independently
4) Supports ADEMCO CONTACT ID and KS6+2 monitoring centermunication
protocol
5) Access codes, 1 installer code, 1 master code, 8mon user code and duress
code
6) Dial 5 telephone numbers (mobile and pager number); dialing type (tone or
pulse) and appointedmunication zone can be programmed; alarm
telephone is priority
7) Option for ARM/DISARM and system status report or not
8) Phone line cut or short-circuit will send an alarm (indicator or siren for optional)
9) Remote arm, disarm, monitor, and on-site alarm setup
10) Automatically register between wireless PIR detector, remote controller and
main console (8 wireless can up to 24 zones, and 8 remote controllers)
11) Wired zone respond speed: 5ms - 1,000ms; supports normal open, normal
close and end- of-line resistance at freedom
12) Zone attribute can be program for fire alarm, medical alarm, emergency alarm
at freedom; each zone can be programmed with different remote control
13) Two timers can be set to arm/disarm independently
14) Alarm delay (00 - 99 seconds) and arm delay (00 - 99 seconds) can be set for
appointed zones
15) Main unit disassembly, slave detector disassembly, AC power cut, backup
battery lower and slave detector power lower will activate alarm
16) Work with wired/wireless siren and linkage device
17) Latest 30 pieces alarm (month/day/hour/minute) can be recorded and can not
be deleted; last arm/disarm time can be remembered
18) Main unit and wireless PIR detector makemunication times in 26 hour to
check if there ismunication malfunction; if there is a malfunction, the main
console will alert corresponding zone within 26 hours
19) Slave detector sends report to main unit for on/off; the report will be
remembered in record
20) Both AC 220V and 12V, 7Ah rechargeable battery power supplied; and
change automatically; the backup battery can work 24 hours or more in standby
21) Battery lower power alert and discharge protection
22) Telephone lightningproof
Technological Parameters:
1) Power Supply: AC220V±15%, Battery: 12V/7Ah
2) Auxiliary Output Power: 550mA
3) Siren Output Current: 1.5A
4) Wireless Working Frequency: 433.92MHz
5) Alarm Sound: ≥80dB within 1m
6) Working Environment: Temperature :0 55 Humidity:40-70%
7) Distance between PIR detector and alarm unit ( in open area ≥400m)
8) Distance between wireless door sensor and alarm unit (in open area ≥200m)
9) Distance between wireless siren and alarm unit (in open area ≥400m)
Accessories:
1) 1pc main unit
2) 2pcs KS-12A Wireless Remote Controllers
3) 1pc Antenna
4) 2pcs Keys
5) 1pc Power Lead
6) 1pc User`s Manual
Security alarm system are used to guarantee the safety of home /office property, families, children health etc. Easy to install, dial to security center, alarm you anywhere immediately!
Buy it before losing! We advise what to do and how to do. Don`t hesitate to ask.
More selection for reference as below:
Free shipping Wireless gas sensor | LPG sensor | Coal gas sensor | Fire alarm | Wireless alarm | alarm accessoriesUS$ 40.95 - US$ 46.11/piece
|
wireless alarm system | home security | alarm kit | alarms | alarm control | alarm keypadUS$ 11.58 - US$ 16.84/piece
|
Wireless Smoke Sensor | Kitchen Smoke detector | Wireless Alarm System Kit | Home fire alarmUS$ 15.79 - US$ 21.05/piece
|
Wireless emergency alarm | Panic switch | alarm accessory | alarm calling | wireless alarmUS$ 26.32 - US$ 36.84/lot
5 pieces / lot |
Shopping Cart