Brand New Zinwell Directv approved 6x8 Multiswitch

Model WB68 

 

6x8 multiswitch designed to interface with 99/101/103/110/119W satellites plus additional inputs (2), Flexport 1 and Flexport 2. Flexports are used to interface with new DIRECTV satellites such as 95 W and 72.5W or both.

This multiswitch needs 4 coaxial wires connected from the 3 or 5 ka/ku lnbf  slimeline dish in order to work properly. it will not work with only 2 wires or with swm lnbf.

Features:

• DIRECTV -approved, with enhanced codes
• Needed for HD programming
• Distribute up to 6 DIRECTV satellite inputs to 8 independently-operating receivers
• Comapatible with existing DIRECTV receivers
• Compatible with newer DIRECTV Advanced Program Guide (APG) receivers
• Easy connections to all DIRECTV dish antennas, see enclosed application diagrams.
• Flexports can only be accessed with latest APG (Advanced Program Guide) satellite receivers. Earlier, non-APG satellite receivers can select the first 4 ports only (101/99/103/110/119W satellites)

you only need one wire for 95W or 72.5W, then always use Flexport 1 before using Flexport 2. if 95 and 72.5 are needed connect them to both flex ports.This will reduce system acquisition time. 

Multiswitch is passive, powered only by the connected satellite receivers. 

 

This 6x8 Multiswitch is approved by Directv for SAT 101,103,99,119,110,72.5, 95 and International programming