New 12V 9AH AGM Battery 12IES009 F2 FR High Rate 1 to 3 Year Warranty MSRP $32.99 [LAX512002]

Condition: NEW

Warranty: 1 Year - 3 Year*

Location: LAX512020

Model #: 12IES009

DC: 12V 9ah (20hr rate)

Sealed Lead-Acid Battery

Maintenance-Free

Approximate Weight: 5 lbs (2.27 kgs)

Application: 12 volt 9 Ah sealed lead acid battery with F2 Fast-on tab terminals in a Flame Retardant case. Designed for equipment that require short term bursts of high rate power such as UPS systems. Will deliver up to 20% more energy output density at 34 watts per cell, or up to 204 watts for 15 minutes to 1.67 volt per cell at 77 degrees in Fahrenheit.

This battery is excellent for general applications as it will provide up to 260 cycles at 100% depth of discharge and has a design life of up to five years of stand-by usage.

Features:

High energy output, high cycling life, high rate discharge
Flame retardant case
Best suited for high rate intensive applications and high efficient UPS
Replaces most standard 12V 7Ah, 7.2Ah, 7.5Ah, 8Ah, 8.5Ah, and 9Ah batteries
Absorbed Glass Mat and Valve Regulated Lead Acid design for maintenance-free use
Low self-discharge rate
For both Cycle or standby (float) use
Deep discharge recoverability
ISO9001 and 14001 certified
IATA/ICAO compliance for Special Provision A67 for air transport
Classified per MG Amendment 27 as a non- hazardous material for water transport
Recognized by DOT as "Dry Charge" 49 CFR 171-189 for surface transport
Specifications
Chemistry Lead Acid
Capacity 9Ah
Rating whr 108
Connector F2
Length 6 inches
Width 2.6 inches
Height 3.7 inches
Weight 6.00 lbs

* This battery comes with a 1 year manufacture replacement warranty. The 3 year full replacement warranty is offered (at no extra cost) when the battery is installed by an authorized  professional, and the proper start-up sheet is returned to IESycle.  Please call 888 -729-2378 for more details.

 

 

Absorbant Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction
allows safe operation in any position. Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified.
Nominal Voltage
Nominal Capacity
Approximate Weight
Internal Resistance (approx.)
Shelf Life (% of normal capacity at 77º F (25º C))
3 Months 6 Months 12 Months
12 volts
100 Ah
30 A or smaller
14.6 - 14.8 V
77º F (25º C)
9Ah
8Ah
7Ah
5 lbs
Charge Method (Constant Voltage)
Cycle Use
Float Use
Initial Current
Control Voltage
Control Voltage 13.6 - 13.8 V
(Repeating Use)
Specification
Terminals F1
Sealed Lead-Acid Battery
Maintenance-Free
12IES009
Temperature Dependancy of Capacity
104 F (40 C) 77 F (25 C)
(20 hour rate)
102% 100% 85%
32 F (0 C) 5 F (-15 C)
65%
AGM Operational Temperature
AGM Storage Temperature
32 F to 104 F (0 C to 40 C)
5 F to 113 F
5 F to 104 F
(-15 C to 45 C)
Charge
Discharge
(-15 C to 40 C)
1020 Hovey SW Grand Rapids, MI 49504 P 888-729-2378
Charge Voltage(V/Cell)
Application
Temperature Set Point Allowable Range
Max.Charge Current
Cycle Use 25 (77 ) 2.45 2.40~2.50
Standby 25 (77 ) 2.285
0.3C
2.27~2.30
Final Discharge
Voltage V/Cell
1.75 1.70 1.60 1.30
Discharge
Current(A)
0.2C>(A) 0.2C<(A)<0.5C 0.5C<(A)<1.0C (A)>1.0C
Charge Current & Final Discharge Voltage
Shelf Life & Storage Cycle Life vs Depth of Discharge
Open Circuit Voltage vs Residual Capacity Effect of Temperature on Capacity
Maintenance-Free
12IES100
Discharge Characteristics
(Minute) (Hour)
Discharge time
Cell voltage (V/Cell)
Discharge Time vs. Discharge Current
Discharge Current = CA X Nominal Capacity
(Minute) (Hour)
Duration of Discharge