|
** NEW ** NEW ** NEW ** NEW ** NEW ** NEW **
Arctic Silver High-Density Thermal Compound
Allows you to achieve even cooler temperatures
2-10 °C lower!
than other standard compounds at full CPU load.
From one of the best known manufacturers - Arctic Silver
Comes in a Reusable Dispencer Tube
(note: the one tube supplied is good for several applications)
The high-density, thermal compound is specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.
It can be used instead of the standard thermal compound to achieve even lower temperatures allowing you to increase performance.
Description
Arctic Silver Ceramique thermal paste is a high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.
Arctic Silver Ceramique is made with micronized aluminum oxide, boron nitride and zinc oxide.
Céramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer.
Electrical Insulator. Céramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads. When measured with a calibrated thermal diode imbedded in the CPU core.
2.7 gram tubes. (About 1cc) At a layer 0.003" thick, one tube will cover approximately 20 square inches.
Features
High-Density ceramic content:
Céramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.
Controlled Triple-Phase Viscosity:
Céramique does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability. During the system's initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Céramique goes through are much more subtle and ultimately much more effective.)
Excellent Stability:
Céramique is engineered to not separate, run, migrate, or bleed.
Electrical Insulator:
Céramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.
Performance:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Easy Clean Up:
Céramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.
Innovative Dispenser:
The 2.5-gram Céramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle and dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.
Compliancy:
RoHS Compliant.
Specifications
- Thermal Resistance: <0.007°C-in2/Watt (0.001 inch layer)
- Thermal Conductance: >200,000W/m2.°C (0.001 inch layer)
- Average Particle Size: <0.38 microns <0.000015 inch
( 67 particles lined up in a row equal 1/1000th of an inch. )
- Temperature limits: Peak: –150°C to >180°C Long-Term: –150°C to 125°C
- Coverage Area:
- 2.5-gram syringes. (About 1cc)
At a layer 0.003" thick, one tube will cover approximately 20 square inches.
- 22-gram syringes. (About 8cc)
At a layer 0.003" thick, one tube will cover approximately 160 square inches.
Images are for illustration only, the supplied product may vary.
The supplied product may vary from the listing by manufacturer and/or model as stock changes sometimes with minor changes in specification.
|
