Check out my other items!

 

IR Remote Control Repeater Kit for IR Distribution

Includes Keystone In-Wall IR Receiver + In-Wall Block + 2 Dual Emitters

Infrared IR Remote Control Extender / Repeater Kit
Are your devices hidden away in a cabinet / cupboard / behind the couch etc? Are you sick of getting up to use the remote? This IR Kit solves the problem! This IR Extender Kit is the perfect way to simplify the way in which you control your Home Entertainment system. Many of today's Home Theatre / Hi-Fi systems are set up with some of the equipment (DVD Player, Amplifier / Receiver etc) out of the way, eg: in a cupboard / cabinet, at the rear of the room, behind the couch, etc. The problem this causes is that if you want to control these devices with a remote control, you have to open the cupboard door, or point the remote control behind you, or something equally as annoying. This IR kit allows you to point all your remote controls forwards (eg: at the TV), and not worry about where each device is located.

It's simple:
- Mount the In-Wall IR receiver, run a piece of Cat5 cable from the receiver to the In Wall IR Block (2 twisted pairs).
- Place the IR emitter(s) over the IR receiver / sensor of your device(s)
- Plug the IR Receiver and the IR Emitter into the IR Connecting Block
- Plug the power adaptor into a mains power outlet and into the IR Connecting Block.

Then all you have to do is point your remote control forwards (at the IR Receiver), which will automatically send the signal through to your devices!

Kit Includes:

• 2 x Dual IR Emitters (A1142) 3M / 10ft length,  4 emitter heads
• 1 x In Wall Keystone Style IR Receiver 47Khz with status/talkback LED
• 1 x Keystone single gang wall plate
• 1 x In Wall IR Connecting Block (A1139W)
• 1 x Decora single gang wall plate for connecting block
• 1 x USA Power Supply 12V DC 200mA 2.4VA
• Manual
• Mounting Screws

A-1139W In-wall IR Connecting Block

1. Provides one IR receiver input and three IR emitter outputs

2. Work with practically all brands of Audio/Video IR remote controls

3. 12VDC status input jack and LED indicator

4. Interface: 3.5mm mini plug (for receiver and emitters);

5. Terminal block on backside (for CAT5) connect ir receivers.

6. Dimension: 114mm x 70mm x 37mm (including blank wall plate)

7. Power supply: 12VDC, 200mA

 

Additional Features:

• You can add multiple receivers in parallel to control from more than 1 room, just run cat5 cable from receiver to IR connecting block.
• Status LED system, additional power supply can be used to supply a remote system status LED which could be used to indicate the on/off status of an integrated system.
• NOTE: The distance between the IR Receiver and the remote control should not exceed 5 meters/ 16.4 Feet 

International Buyers – Please Note:

• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.