|
Check out my other items!
IR Distribution Over Coax Target
Remote Control IR Injector for IR Distribution
Includes Dual Frequency IR Receiver and A-1186 IR Injector for expanding an existing setup.
Infrared IR Over Coax Remote Control IR Receiver and Injector. This is an expansion to our IR over coax kit. This package will allow you to add another remote TV location to your system, you can have up to 4 remote TV locations on one system. This item cannot be used alone, it must be added to an existing IR over coax system.
Features:
-
Creates an IR distribution system with existing coax wiring, will pass IR signals over your existing CATV coax without interfering with TV broadcasts.
-
1 Coupler with Power supply can power up to 4 IR receivers and injectors at remote TV locations.
-
Quick and easy installation
Basic IR Setup:
A basic IR system is often used when an audio/video signal is distributed to a remote TV location using an RF modulator. The IR INJECTOR & its IR Receiver is located near each remote TV location. The IR COUPLER is located near the source equipment (satellite receiver, cable box, HTPC) and provides IR emitter outputs for controlling the sources. Then you can control your sources from the remote TV locations and the IR receivers will send your signal down the coax.
Expansion Kit Includes:
Surface Mount Mini IR Receiver Features:
-
CFL Friendly, allows installations in areas with compact fluorescent lighting, and works in most lighting environments.
-
IR comfirmation LED provides user feedback when IR signals are sensed
-
Wide band IR receives IR from most types of remotes, This is the advance receiver working at 38Khz - 56Khz.
-
Self-adhesive tape for quick and easy installation
-
3 meter cable with 3.5mm stereo mini-plug
-
Receive freqency range: 34Khz to 60Khz
-
Transmit frequencies: 38Khz & 56Khz
-
Range: 40ft @ 38Khz, 25ft @ 56Khz
Note: a DC block is required on all outputs of the
splitter that do not have IR components connected.
These are the 2 items you will receive:
|
Shopping Cart
