Description:

​We tested these straps on stage and have put them through the paces in the shop. They are extremely well made and hold your instrument securely in all but the most rigorous situations.  If you are spinning your guitar around your body this may not be the solution for you, but normal playing and running around, jumping, etc. they hold true time and again. Stop changing out your strap buttons with expensive replacements and get a strap that does the job for you!

From Lock-It:

Our all new polypro straps represent the very best value, quality and entry level into our locking technology. Traditionally, polypro straps have served the industry uncompromisingly and still do. They offer superb strength, adequate comfort and shoulder slip, easy cleanability and the least amount of maintenance. These straps cover the widest range of use. Having our locking technology on the ends just makes plain good sense!
Length: Poly straps adjust from 36" (91 cm) to 60" (152 cm).
Lock-It Straps are Made in the USA

FAQ
Q: What is a strap with a "reversed" front end and why would I need one?
A: If your guitar has a front endpin (strap button) on the back side at the heel of the neck, then it's best to use a Lock-It strap with a "reversed" front end. Some examples would be: ES-335's, SG's and many jazz guitars. The best solution would be to have the lock's thumb button facing AWAY from your guitar's body. Although it's entirely possible to use one of our standard straps with the lock button facing away from the guitar, there would be a half-turn twist in the strap. Having a reversed front end Lock-It strap prevents this twist.
 
Q: Do your leather straps come in reversed and would I need one?
A: No, there's no need. Our leather straps can easily be used in the reversed configuration by simply reversing the tail (length-adjustment end). Since the leather is identical on both sides of the strap, it makes no difference at all.
 
Q: Do your locks work with guitars that use strap lock system endpins?
A: Although our locks easily fit over the strap buttons installed on guitars using metal strap locks, it's not recommended. Those strap buttons tend to have a much smaller head than stock strap buttons and may want to dislodge from our locks.
 
Q: Will your locks fit over my Taylor E model output endpin jack?
A: It'll be a little tight at first, but yes, it will -- our locking ends are one of the few that do. Not only can the large output/jack get though our strap, it's thin enough to get under the top of the jack's flange.
 
Q: Do your locks fit Fischman type output/endpin jacks?
A: Fischman type output jacks are by far the very largest to get any strap-end over. Many musicians have purchased our straps and swear they can get them on and work fine. We find it's a very tight fit and would not honor a return after it's been used on one of these types of output jacks.
 
Q: Will your locks fit the large pins for a PRS guitar?
A: Yes, our locks fit the large PRS strap buttons. A new Lock-It strap will be tight at first, but will break in over time.
 
Q: Do your locking ends fit other stringed instruments such as banjos, mandolins and ukuleles?
A: Unless your banjo, ukulele, or mandolin (or any other stringed instrument) has strap buttons similar to a guitar's, then no, it will not.
 
Q: What kind of plastic is your lock made from?
A: Locks are composed of a proprietary blend of polymers specially formulated for their superior toughness and resistance to failure due to fatigue and stress. Although the material is a company secret, it's recognized as one of the world's toughest polymer alloys ever!
 
Q: Do you plan on using a metal lock?
A: Metal is great for many applications, but not when it comes to flexing and bending. A thin metal counter-part would eventually crack due to repeated flexing under stress. It would scrape the plating off your guitar's strap button and could potentially scratch the guitar itself. So no, we would not use it. Believe us: we're looking out for your guitar's best interest.
 
Q: What is your warranty?
A: We're proud to say that our new locks have exceeded everyone's expectations and carry a one year, limited, factory warranty (details on the Lock-It website).