7"LCD
»Display size:7inch (16:9)
»New Panel:AU TFT-LCD panel
»Resolution: 480xRGBx234pixels
»Dual Video input
»Works on PAL & NTSC(AUTO)
»LPower consumption:<7W
»24V/12 Volt (9-25 Volts as supplied by a vehicle battery.)
Truck Camera:
»High definition,1/3 Sharp CCD
TV System | PAL |
Effective Pixel | PAL: 628(H)×582(V)NTSC: 512(H)×492(V) |
Sensing Area | 5.78mm x 4.19mm/4.69mm x 3.54mm |
Resolution | 380 TV Line |
Min illumination | 2Lux/F1.2 W/IR |
Night Vision | 15-20m |
Lens | 3.6/2.9mm |
S/N Ration | >48db (AGC-OFF) |
Shutter speed | 1/50/1/60 - 1/15,000 seconds |
Video Output | RCA 1.0Vp-p,75Ω |
Power supply | DC 24V |
Current Coumption | 200mA |
Operation Temp. | -10°C -- + 50°C, RH95% Max. |
Storage Temp. | -30°C -- + 60°C, RH95% Max. |
White Balacnce | Auto |
Size | 72*63*42mm |
Weight | 350g |
Includes
»7 inch Monitor.
»12V Sharp CCD Truck Camera
»Adjustable Tripod with Adhesive.
»Remote Control.
»Power/RCA Cable,12m vedio cable
note:this system fit for 12V power supply. if your car is 24V system. please purchase below link:
Installation Options
»Mount on the included Tripod with adhesive bottom.
»Mount on a bolt using slot on back. (see picture)
Put the camera on the back of the car (Position:the license plate,back window or other suitable place)
Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.