Connect an IDE hard drive to your motherboard's Serial ATA controller or vice versa with this Bi-Directional IDE to SATA Converter or SATA to IDE adapter! It's easy to install and there are no drivers needed! There is a switch for either SATA to IDE or IDE to SATA. Key features include Jmicro JM20330 Chipset, 150 MB/s transfer rate, automatic SATA 3.0/1.5 Gbps speed negotiation, and support for Support 3.5-inch IDE hard drives and 5.25-inch optical drives.
	Features/Specifications:
	Bi-Directional IDE to SATA or SATA to IDE Adapter General Features: Jmicro JM20330 Chipset Bi-Directional adapter Plug and Play and Hot-Swapping capability 150 MB/s transfer rate Automatic SATA 3.0/1.5 Gbps speed negotiation Serial ATA 1.0 specification compliant Support Serial ATA hot-plug Support ATA Host Bridge Support ATA PIO and UDMA modes 0 to 4 ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count Support 3.5-inch IDE hard drives and 5.25-inch optical drives Ultra low power consumption Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level Master/Slave mode support LED power indicator Regulatory Approvals: CE FCC C-Tick
	Package Includes:
	Bi-Directional IDE to SATA or SATA to IDE Adapter SATA cable 1 to 3 Power Adapter cable User Manual
Return Items must be returned within 30 days . Refund will be given as Money back. Refund policy details: Shipping Destination: Costa Rica Carrier Method Shipping Cost Per additional Item STANDARD Standard $3.99 $0.99 Destination: Worldwide Carrier Method Shipping Cost Per additional Item CUSTOM $5.99 $1.99 Payment Method Type Instructions to Buyer Paypal Handling $0.00(Domestic) $0.00(International) Insurance Not Offered (Domestic)