Specification

• Mfr Part Number: TEW-L208
• Features:
  • Wi-Fi Compliant with 2.4GHz 802.11 b/g & 5GHz 802.11a Devices for extending wireless networks
  • Reverse SMA Female to N-Type Male Connector.
  • Optimal placement of your existing Wi-Fi Device permits you to maximize its wireless performance.
  • Flexible outer conductor allows the tightest bend radius available for any cable of similar size and performance
  • Provides flexible Low-loss communication for wireless antenna
  • 50dB RF Shielding is 10 dB greater than typical single shielded coax (40 dB).
  • Multi-ply bonded outer foil conductor is rated conservatively at > 90 dB.
  • Weatherproof cable design for outdoors exposure with best materials for UV resistance
  • Polyethylene jacketed cable designed for outdoor use
  • Easy and quick deployment into a WLAN environment
• Construction:
  • Inner Conductor (Solid BC): 0.044 inch / 1.12 mm
  • Dielectric (Foam PE): 0.116 inch / 2.95 mm
  • Outer Conductor (Aluminum Tape): 0.121 inch / 3.07 mm
  • Over Braid (Tinned Copper): 0.144 inch / 3.66 mm
  • Jacket (PE): 0.195 inch / 4.95 mm
• Mechanical:
  • Bend Radius: Installation: 0.5 inch / 12.7 mm
  • Bend Radius: Repeated: 2.0 inch / 50.8 mm
  • Bending Moment: 0.2 ft-lb / 0.27 N-m
  • Weight: 0.022 lb/ft / 0.03 kg/m
  • Tensile Strength: 40 lbs / 18.2 kg
  • Flat Plate Crush: 15 lb/inch / 0.27 kg/mm
• Electrical:
  • Cut-off Frequency: 39 GHz
  • Velocity of Propagation: 83%
  • Dielectric Constant: 1.45
  • Time Delay: 1.22 nS/ft / 4.02 nS/m
  • Impedance: 50 ohms
  • Capacitance: 24.5 pF/ft / 80.3 pF/m
  • Inductance: 0.061uH/ft / 0.20 uH/m
  • Shielding Effectiveness: > 90 dB
  • DC Resistance: 5.36ohms/1000ft / 17.6 ohms/km
  • Inner Conductor Outer Conductor: 4.9 ohms/1000ft / 16.1 ohms/km
  • Voltage Withstand: 1000 Volts DC
  • Jacket Spark: 3000 Volts RMS
  • Peak Power: 2.5 kW