Server Board Overview

The Intel? Server Board SE7210TP1-E is a monolithic printed circuit board with features that were designed to support the entry server markets.

In this document, ?SE7210TP1-E? will be used to describe the family of boards that will be made available under a common marketing name. The core features for each board will be common; however each board will have the following distinctions:

SE7210TP1: Onboard SATA (RAID)
SE7210TP1SCSI: Onboard SCSI + Onboard SATA (RAID)
SR1325TP1: Onboard SATA (RAID) + Low Profile PCI Slot and Riser

Throughout this document, all references to SE7210TP1-E will refer to all three board SKUs unless specifically noted otherwise. The board you select to use may or may not have all the features described based on the listed board differences.

SE7210TP1-E Feature Set

o Support for an Intel? Celeron processor or an Intel? Pentium? 4 processor with hyperthreading technology in a ?PGA478 socket.
o 400/533/800 MHz Front Side Bus (FSB)
o Intel? E7210 chipset

? Intel? 827210 Memory Controller Hub (MCH)
? Intel? 6300ESB I/O Controller Hub
? Intel? 82802AC 8 Megabit Firmware Hub (FWH)

o Support for single-sided or double-sided dual inline memory module (DIMM) double-data rate (DDR) memory providing up to 4 GB of system memory with four 184-pin DIMM sockets.

? PC3200 (400 MHz): to run 400 MHz memory at full speed requires an Intel Pentium 4 processor with 800 MHz system bus frequency.
? PC2700 (333 MHz): to run 333 MHz memory at full speed requires an Intel Pentium 4 processor with 533 MHz system bus frequency.
Note: PC2700 (333 MHZ) memory will run at 320 MHz frequency when using an Intel Pentium 4 processor with 800 MHz system bus frequency.
? PC2100 (266 MHZ): PC2100 (266 MHZ) memory may only be used with an Intel Pentium 4 processor with 400 MHz or 533 MHz system bus frequency only.

o Intel 82547GI Platform LAN Connect (PLC) device for 10/100/1000 Mbits/sec Ethernet LAN connectivity
o Intel 82551QM device for 10/100 Mbits/sec Ethernet LAN connectivity
o Two independent PCI buses (one 32-bit, 33 MHz, 5 V; one 64-bit, 66 MHz, 3.3V) with four PCI connectors and two embedded devices:

? Three PCI-X 64-bit PCI slots
? One 32-bit PCI slot
? Integrated 2D/3D graphics controller: ATI Rage* XL Video Controller with 8 MB of SDRAM
? Optional single channel, Ultra 320 SCSI controller (on SE7210TP1SCSI): Adaptec* 7901

o LPC (Low Pin Count) bus segment with one embedded device: Winbond* W83627HF-AW LPC Bus I/O controller chip providing all PC-compatible I/O (floppy, serial, keyboard and mouse)
o Three external USB 2.0 ports on the back panel with an additional internal header, which provides support for one additional USB port for front panel support (four total possible USB 2.0 ports)
o One serial port and one serial port header
o Two Serial ATA (SATA) ports provide interface for SATA hard drives and ATAPI devices
o Two IDE interfaces with Ultra 33, 66 and 100 DMA mode
o Support for up to six system fans and one processor fan
o Server System Infrastructure (SSI)-compliant connectors for SSI interface support: front panel, power connector
o Intel Server Management 5.8 support via the National* Semiconductor PC87431 integrated management controller