Specification - Mfr Part Number: FSP200-50PL-B
- Features
- Complied with Flex ATX and ATX12V standard
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 1950, CSA C22.2 Level 3
- Input:
- Input Range: 90 ~ 132 / 180 ~ 264V AC, Manual Selection
- Frequency: 47 ~ 63 Hz
- Input Current: 5A (RMS) @ 115V AC, 3A (RMS) @ 230V AC
- Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
- Output:
- Totao Watts: 200 W
- +5V and +3.3V total output not exceed 75W
- +3.3V, +5V, and +12V total output cannot exceed 186.5W
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Efficiency: 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
- Rise Time: Less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
- MTBF: 100,000 hours on maximum load at +25?C degree
- Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm
|
Shopping Cart