Specification - Mfr Part Number: FSP300-60PLNR
- Features:
- 20pin Main Power connector
- Complied with ATX and ATX12V standard
- Active Power factor correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), and CE
- Input:
- Input Range: 90 ~ 264 V AC, Full Input Range
- Frequency: 47 ~ 63 Hz
- Input Current: 6A (RMS) @115V AC, 3A (RMS) @230VAC
- Inrush Current: 60A Max for 115V AC, 90A Max for 230V AC
- Output:
- Total Watts: 300 W
- +5V and +3.3V total output not exceed 180W
- +3.3V, +5V, and +12V total output not exceed 280W
- Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
- Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
- Rise Time: Less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 0.75mA at 115V AC/60Hz
- MTBF: 100,000 hours on maximum load at +25°C degree
- Dimension (WxLxH): 5.9 x 5.5 x 3.4 inch / 150 x 140 x 86 mm
|
Shopping Cart