Pressure washer features good
mobility suitable for all types of applications!
Great cleaning stairs, lawn equipment, farm
equipment, fencing, decks or patios, garage floors, driveways, siding,
second stories of homes, boats, cars, car washes. You name it will clean it.
An other feature of the washer is that it will
suck water from a none pressurised source so you don't need to connect
it a tap to run it.
Please see the pictures attached of the filter provided if
this is how you want to use it.
Please note: The pump must be primed with
water if it is to be used from a non pressured source before using.
The
washer also has a detergent feed that attaches to the outlet side of the
pump which enables you to apply a detergant before a high pressure
spray.
Just a matter of the the pipe in the detergent container and
changing the nozzle to the black low pressure one.
It has four inter changeable nozzles with you would need for
different jobs. The narrowest for those really stubborn stain and last
for damping down of applying chemical. See the pictures provided.
Features
• 5.5HP engine
• 1mtr gun and lance and
• 4 changeable nozzles.
• Low-pressure detergent injection system
• Safety latch on trigger
• Automatic low-oil engine shut-down
• High pressure hose : 8 meter
• Tilts back onto two pneumatic tyres for
moving.
Specifications
• Engine type : 4 stroke, single cylinder
petrol
• Engine
power : 3.2kwkW (5.5HP) @ 3400 rpm
• Working pressure: 154bar
• Max pressure: 125=135bar
• Max supply pressure: 2bar
• Water flow rate : 7.5L/min
• Bore/Stroke: 68*42
• Fuel tank : 3.6 litre
• Fuel consumption : 360g/k.W.H (2.1 - 2.6
litre/hr)
• Fuel
: Unleaded petrol (86 ron min)
• Oil Type: SAE 10W-40 high performance
• Oil quantity: 0.60L
• Engine capacity : 196cc
• Max Water Temp: 45c
• Hose length : 8 meters
• Net weight : 34 kgs / 37 kgs
• Starting : Recoil
• Valve clearance: Inlet 0.15mm / Exhaust
0.20mm
• Spark
plug type: NGK I6RFT BMR4A
•
Measurement: 64x48x50cm
Shopping Cart
