Solar Powered LCD Welding
Helmet CE Approved ADH100
The welding helmets comply
with EEC Directives 89/686 CEE.
This conformity is
established in compliance with EN 379.
Introduction
The welding helmet is delivered ready
for use. For your protection and to ensure that your LCD VISION auto
darkening welding helmet functions properly, read these instructions
carefully and consult with a qualified instructor prior to operation.
Before
Welding
Check whether the front
cover lens and the front frame are inserted and fixed in place. Use the
correct level of protection for your welding process. Please refer to
the following chart to help your choice.
Preparations for Use
The LCD VISION
auto-darkening welding helmet switches light to dark state when a
welding arc is struck. The auto-darkening welding helmet switches
back
to the light state when the arc stops.
Safe Practice
The
auto-darkening welding helmet is suitable for use with virtually all
welding processes except Oxy-Acetylene welding, laser welding and gas.
However, it is not recommended to use this type of filter when the arc
is glimmer or just incandescent. In this case, it is necessary to do a
try out before use
Standard protective plates must be installed
on both the inside and the outside surfaces of the filter. Failure to
use protective plates may constitute a safety hazard or result in
irreparable damage to the filter.
Maintenance
Carefully inspect the LCD
VISION auto-darkening welding helmet. Cracked, pitted or scratched
filter glass or cover plate reduces vision and seriously reduces the
level of protection. Such damaged components must be replaced
immediately to avoid risk of serious eye and face injuries. Clean the
lens with a lint free tissue. Do not use solvent.
Warnings
Use the auto-darkening
welding helmet only for eye and face protection against harmful ultra
violet and infra-red radiation , sparks and spatter from welding.
Protective plates are fragile.
This product will not protect you
against serious impact hazards such as,fragments of grinding .wheels or
abrasive discs, stones ,or other grinding tools,explosive devices or
corrosive liquids ETC,. Appropriate protection must be used where these
hazards exist.
Do not use any tools or other sharp objects to
remove any components of filter or helmet .Doing so may damage filter or
helmet preventing proper function possibly causing injury or
cancellation of the warranty.
Specification
Shade light: 3
Shade
Dark: 11
Switching Time: <0.5ms
Energy
Source: Solar Cells
Weight:
480g
Field of Vision: 96 x 46mm
Application
Field: Electrode, MIG/MAG
Manufacturers Warranty: 1year
Operating Temperature: -5ºC + 55ºC
RRP - £49.99
Shopping Cart
