This remote can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device.
It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb).
Use this remote control as a wireless remote shutter release for self-portraits or to present blur caused by camera shake.
Specifications:
1. 100% Brand-new, Higher quality than other remote controllers.
2. 9 in 1 IR remote control;100% Compatible with CANON WL-DC100 RC-1RC-5,PENTAX REMOTE F REMOTE E,NIKON ML-L3,OLYMPUS E420 RM-1 RM-2,MINOLTA RC-3 infrared remote control.
3. Easy-to-replace CR2025 lithium battery.
4. Operating temperature: 5°C to 40°C (40 °F to 105 °F).
5. Typical Battery Life: up to 3 years, 20,000 exposures.
6. Operation distance: 1cm-5meters.
7. Dimension:86mm x 39mm x 6mm
8. Can work with over 100 different cameras.
9. Comes with the very detailed user manual/instruction.(Including:How to use it;what's the function of each buttons;Specficaion;how to replace the battery;how to care and storage;which cameras are compatible with it......) :
Olympus
E1/ E10/ E20/ E100 RS/ E300/ E330/ E500/ E2100/ E2500
Stylus800/ Stylus500/ Stylus410/ Stylus400/ Stylus300
D40 Zoom/ C8080/ C770/ C755/ C750/ C730/ C7070/ C7000/ C60/
C5060/ C5050/ C5000 Zoom/ C50/ C4040/ C3040/ C3030/
C3000 Zoom/ C2500L/ C2100/ C2040/ C2020/ C2000 Zoom/
u800/ u500/ u410/ u400/ u300
Nikon
D80, D70S, D70, D50, 8400, 8800, Pronea S,
F75, F65, F55, N65, N75,
150ED,140ED,130ED,110S, Nuvis S, Lite Touch.etc
Canon
EOS 450D(Rebel XSi), EOS 400D(Rebel XTi), EOS 350D(Rebel XT), EOS 300D, EOS 30/33/30V,
EOS 50/55, EOS kissIII, EOS kissIIIL,EOS 100,
EOS 10, EOS 300V, EOS 300X, 300VQD,
EOS IX, IXUS jr/II/III,SURESHOT, SURESHOT,
ELAN7, Rebel T1 Date,Rebel T2 Date, Z180u,
Z155, 120, 370Z, 370Z,Z3
Canon DC(*Only work with shutter function.):
Power Shot Pro 1,G1,G2,G3,G5,G6,S1 IS,S70*,S60*,Pro 90 IS.etc
Pentax
*istDS2, *istDS, *istDL2, *istDL, *istD, K100D,K100D super,K110D, K200D, K10D,K20D,K-M
Optio S6/S60,Optio S5z/S5n/S5i, Optio S4i/S4, Optio SV/SVi,
Optio 550/555,Optio 750z, Optio 330/430[rs], *ist, MZ-6,MZ-L,ZX-L.etc
Samsung
GX-1L,GX-1S,GX-10.etc
Konica/Minolta
DiMAGE F100/ 200/ 300/ A200
DiMAGE S414, DiMAGE S404, DiMAGE S304,
/Dynax /Maxxum 5 Date, /Dynax /Maxxum 4 Date,/Dynax /Maxxum 3(L) Date,
/Dynax /Maxxum 40,/Dynax /Maxxum 50 Date,/Dynax /Maxxum 60,/Dynax /Maxxum 70,
α5/ α4/ α3L/ α60/ α40/ Capios Series
Riva/Freedom/Capios Zoom 20,Riva/Freedom/Capios Zoom 75W,
Riva/Freedom/Capios Zoom 115
Date,Riva/Freedom/Capios Zoom 125 Date,
Riva/Freedom/Capios Zoom 130
Riva/Freedom/Capios Zoom 140/160(A),
Riva/Freedom/Capios Zoom 150 Date.etc
User Instruction:
1.For the first time use. please install the original battery into the battery holder.
2.Mount the camera on a tripod or place the camera on a stable, level surface.
3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).
5.How the camera focuses and shoots depends on the option selected camera's custom setting.For futher information,check your camera's manual.
6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.
7.Battery : CR2025.
|