Digital Multimeter Thermometer (°C/°F) Voltmeter AC DC Ohm Hz with 6000 counts *******           The Professional Auto-range Digital Multimeter is a high performance and high accuracy multimeter with large 3 6/7 digits LCD display with 6000 counts. The designed parameter has the function of measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Frequency, Temperature (°C / °F), Duty circle, Transistor, Diode and Continuity Performance Test. Features includes: analog bar and unit symbol display, data holding, relative value measuring, maximal / minimal value measuring, auto / manual range switching (RANGE), auto power off and warning function. Plus, it adopts double integral A / D converter as its core. It is an ideal tool for labs, factories and radio-technology.It is designed according to IEC1010 standard ( safety standard issued by International Electro technical Committee.) Special Features Double integral A/D conversion Designed for field professionals Full overload protection 6000 counts (3 6/7 digits) Large LCD Display Full function protection, anti-high voltage circuit design. Low battery display indication Unit symbol display and 61 selection analog bar display With automatic polarity Selectable between °C and °F Relative Value, Frequency/Duty cycle, transistor measuring and data hold Specifications Display: 6000 (3 6/7) digits Large LCD with automatic polarity, unit symbol and 61 selection analog display Measuring method: double integral A/D Conversion Sampling Rate: approx. 3 Times / Second Over range indication: "OL" displayed in the highest digit Low battery display symbol Operating Temperature: 0 ~ 40 °C; Operating Humidity: <80% RH Storage Temperature: -10 ~ 40 °C; Storage Humidity: below 80% RH Safety Standards: CE, IEC1010, double insulation II Power: 2 x 1.5 V AAA batteries (included) Dimensions: 185 (L) x 93 (W) x 35 (H) mm Weight: approx. 290g (batteries included)   Technical Specification: Accuracy is ±(percentage of reading + number of digit) at (23±5) °C, <75% RH. DC Voltage Range Accuracy Resolution 600mV ±(0.5%+3d) 0.1mV 6V 1mV 60V 10mV 600V 100mV 1000V ±(1.0%+3d) 1V Input impedance: approx. 10MΩ Overload protection: 1000 V DC or 750V AC peak value AC Voltage Range Accuracy Resolution 6V ±(0.8%+5d) 1mV 60V ±(0.1%+5d) 10mV 6000V 100mV 750V 1V Input impedance: approx. 10 MΩ Frequency response: 40~400 Hz Overload protection: 1000 V DC / 750 V AC peak value Sine wave RMS (Average value response) DCA Range Accuracy Resolution 600uA ±(1.0%+3d) 0.1uA 6000uA 1uA 60mA 10uA 600mA 100uA 6A 1mA 20A ±(2.0%+5d) 10mA Max. Measuring voltage drop: full range mA: 300mV, A:100mV Max. input current: 20A (less than 10 sec) Overload protection: 500mA/250V and 15A/250V fast molten fuse ACA Range Accuracy Resolution 600uA ±(1.2%+5d) 0.1uA 6000uA 1uA 60mA 10uA 600mA 100uA 6A 1mA 60A ±(2.5%+10d) 10mA Max. Measuring volt drop: full range mA: 300mV, A:100mV Max. input current: 20A (less than 10 sec) Overload protection: 500mA/ 250V and 15A/250V fast molten fuse Frequency response: (40~100)Hz Resistance Range Accuracy Resolution 600Ω ±(0.8%+5d) 0.1Ω 6kΩ ±(0.8%+3d) 1Ω 60kΩ 10Ω 600kΩ 100Ω 6MΩ 1kΩ 60MΩ ±(1.2%+5d) 10kΩ Overload protection: 250V DC/AC Peak Value Open circuit voltage: 600 mV Capacitance Range Accuracy Resolution 40nF ±(3.5%+10d) 10pF 400nF ±(2.5%+5d) 100pF 4uF 1nF 40uF 10nF 400uF 100nF 2000uF ±(5.0%+8d) 100nF Overload protection: 250V DC/AC Peak Value Frequency Range Accuracy Resolution 10Hz ±(0.5%+4d) 0.1Hz 100Hz 0.1Hz 1000Hz 1Hz 10kHz 10Hz 100kHz 100Hz 1MHz 1kHz 60MHz 10kHz NPUT SENSOR: 0.7V Overload protection: 250V DC/AC Peak Value Diode and Continuity Test Range Description Test Condition Diode Display read approx.forward voltage of diode Forward DC Current approx 1.0mA Reversed voltage approx. 3.0V Buzzer Buzzer sounds if resistance between terminals V/Ω and COM is less than (50± 10) Ohms Open circuit voltage:0.5V Overload Protection: 250 V DC/AC peak value Warning: Do not input Voltage at the range for safety hFE Range Description Test Condition NPN or PNP 0 ~ 1000 Basic Current is Approx. 15 µA. Vce is approx. 4.5V Temperature Range Description Test Condition -40 ~1000 °C < 400 °C ± (0.8% + 4d) ≥400 °C ± (1.5% + 15d) 1 °C 0 ~ 1832 °F < 750 °C ± (0.8% + 5d) ≥750 °C ± (1.5% + 15d) 1 °F Thermocouple: K Type Warning: Do not input any voltage at this range Set Includes 1 x Auto Range Digital Multimeter Test Leads 1 x K-Type Thermocouple Wire 1 x Non-slip Rubber Protection Cover 2 x 1.5 V AAA batteries (installed) 1 x Instruction Manual Standard Factory Package     Copyright © 2008. All rights reserved. Discount Instrument *