|
This 2.4" Color LCD TV Inspection Video Camera uses
optoelectronic. It has 180° Image Rotation
function on receiver allows you to adjust viewing orientation,
connect to TV with provided Video Cable and 10mm head to
get into smaller areas. Mechanics will love this tool because
they can see inside the motor without the time-consuming
disassemble. It can also be used to check wear on pinion
gears. Building contractors and home inspectors will use
this to look inside of walls.
It has built-in 2 LED lights with
Brightness control, glare-free close-up & wide range
field of view. It has 1m (3.3ft) Flexible Waterproof
standard cable plus 3M extension cable with 30M
exploration distance total of 4M metal cable,
all included in the set. These cables can be used to inspect
an area even under water, gaps and holes. If 4 meters is
not enough, you may buy our optional 3m (9.9ft) metal
cable extension cable without comprising the quality
of the images it can produced.
Accessories such as mirror tip
is included for viewing within 54° angle. Strong
magnetic tip allows you to pick-up nuts, bolts
and screws you may have dropped in inaccessible places.
Easy clip on design for fast installation. Hook tip,
J-shaped extension used to tug, pull or pick up small objects
or wires.
Applications:
Industrial field, Petrochemical field,
Electric field, Gas pipe, Building Construction & Home
inspection, Pest Control, HVAC, Automotive, Safety and
security inspections, Aerospace
Special Features
- NTSC TV video
AVI output with video wire
- TV Video output
- 6.8mm PE covered metal probe with
ABS handle
- Water resistant Camera Head
- F2.8 Lens with 54° Viewable
Angle and 3~6cm focal distance
- High resolution image, optical system,
stable performance and easy to operate
- Picture vertical mirror/normal function,
allows 180° image rotation
- With Protective Rubber Housing,
serves as shock absorber when accidentally dropped
- High visibility color LCD display
- Built-in high power adjustable
LED's light
- Lightweight ergonomic design
- Fit for hard-to-reach distant inspection
- With CE marking, meets EU safety,
health and environmental requirements
- With Approval from EMC, RoHS, PAHS,
DEHP, FCC
- Option to buy extra 3M Extension
Cable (9.9 feet) for US$ 34.00 / GBP 22.00 / AU$
36.00 / EUR 26,00 only
- LCD: 2.4 inch TFT Color screen
with 320x234 resolution
- Lens sens resolution: 320x234 pixels
- Sensitivity: 0.7V (Lux.sec)
- CMOS Sensor
- Color Mosaic: RGB Bayer Pattern
- Auto white comparison & exposure
to light
- Video Format: NTSC composite video
- Handle End AVI Port: NTSC Signal
Out
- Level of Resistant: IP67
- Camera:
- Lens: F# 2.8
- Lens Coverage : 54°
- Focus: 3-6cm
- Outer diameter: 10mm
- IP 67 water resistant
- Probe:
- Metal Tube Length: 88.0
±2.0cm
- Diameter of hard tube: 6.8mm
- Minimum Bending Radius: 4.5cm
- Operation Temperature: 0~45°C
- Body Size(LxWxH): 81 x 75 x 62mm
- Handle Length: 11.5cm
- Power: 4 x 1.5V AA batteries (not
included in the set)
- Power Consumption: 200mA
- TV Cable Length: Approx. 1.5M
- Weight: approx. 370gm (excluding accessories)
Standard
Set Includes
- 1 x Extendable Borescope / Endoscope
with NTSC TV Video AVI Output
- Operation Manual
- 1 x Standard 1-meter Probe
- 1 x 3-meter Metal Probe Extension
(FREE)
- 1 x Protective Rubber Housing
- 1 x Magnetic Tip (FREE)
- 1 x Hook Tip (FREE)
- 1 x Mirror Tip (FREE)
- Standard Factory Package (FREE)
- 1 x Video cable (FREE)
OPTIONAL
- 3M Metal Probe Extension
Just add US$34.00 / GBP22.00 / AU$36.00 / EUR 26,00
to your order and you will get a 3M Metal Probe Extension
in extra
|
