Auto & Manual Range AC/DC Professional Clamp Meter with Diode Test V / A / Ohm / Hz / Capacitance / ADP *****           This Professional Multifunction AC/DC Clamp Meter has both Auto & Manual Range with 5999 counts. This clamp meter measures DC and AC voltage, AC current, Resistance, Capacitance, Frequency, Diode, Continuity and ADP Measurement. In addition to features are Hold Data, Backlight, MAX/MIN Mode and Over range protection. It clamps around an electrical conductor to allow the electrical current in the conductor to be measured, without having physical contact with it, or to disconnect the wiring through which the current is flowing. It complies with all essential health and safety requirements set out in European Community Directives. It also meet internationally proven safety standards such as IEC1010-1, IEC1010-2-032, concerning electrical measuring instruments with double insulation overvoltage category 1000V CAT II 600V CAT III and pollution degree 2. Special Features Professional Multifunction AC/DC Clamp Meter Test Functions DCV, ACV, ACA, Resistance, Continuity, Diode, Capacitance, Frequency, and ADP Measurement Function keys: Data hold, MIN/MAX and Backlight International Standards: CE, IEC1010-1, IEC1010-2-032, CATII 1000V, CATIII 600V, EMC Reliable and accurate measured results Φ40mm maximum conductor diameter Ergonomic grip with bigger jaw opening and larger conductor size Bigger LCD screen with higher maximum reading Overload Protection Impedance in circuit is below 40Ω with buzzer alarm Auto power off and low battery indication Auto and Manual Ranging Safety Guard and secured jacks Double insulated Design in accordance with Electromagnetic Compatibility (89/336/EEC) & Low Voltage (73/23/EEC as amended by CE Marking (93/68/EEC) Includes heavy-duty test leads and batteries Specifications Accuracy: ±% of reading ±number of least significant digits at 18~28 °C, with relative humidity up to 75%. All specifications assume less than 1 year since calibration. Temperature coefficient: 0.1 x specified accuracy / °C General Specifications: Maximum Voltage: 1000V CATII 600V CATIII Altitude: 2000m Display: LCD 5999 counts Update 2 ~ 3 per second Ranging Method: Auto/manual Range Mode Polarity Indication: "-" display for negative polarity Over Range Indication: LCD will display "OL" Low Battery: icon will appears on LCD Jaw Capability: 40mm, Max conductor size Power: 3 x 1.5V AAA Batteries Operating Temperature: 5 ~ 35°C Storage Temperature: -10 ~ 50°C Dimension: approx. 225 (L) x 86 (W) x 32 (D) mm (8.86' x 3.39' x 1.26' inch) Weight: approx. 330g Electrical Specifications: DC Voltage Range Resolution Accuracy 6 V 1 mV ±(0.8 % of reading + 5 digits) 60 V 10 mV 600 V 0.1 V 1000 V 1 V ±(1.0 % of reading + 5 digits) - Input Impedance : 10MΩ (ohm) - Overload Protection: 1000V DC or 700V AC RMS AC Voltage Range Resolution Accuracy 6 V 1 mV ±(1.2 % of reading + 5 digits) 60 V 10 mV 600 V 0.1 V 750 V 1 V ±(1.5 % of reading + 8 digits) - Input Impedance : 10MΩ (ohm) - Frequency Range: 40~400Hz - Overload Protection: 1000V DC or 700V AC RMS AC Current Range Resolution Accuracy 600 A 0.1 A ±(2.5 % of reading + 5 digits) 1000 A 1 A ±(3.0 % of reading + 5 digits) - Overload Protection: 120 % ranges for 60 seconds max. - Frequency Range: 50~60Hz Resistance Range Resolution Accuracy 600Ω 0.1Ω ±(1.0 % of reading + 3 digits) 6kΩ 1Ω 60kΩ 10Ω 600kΩ 0.1kΩ 6MΩ 1kΩ 60MΩ 10kΩ ±(5.0 % of reading + 8 digits) - Overload Protection: 250V DC or RMS, AC for all ranges Capacitance Range Resolution Accuracy 600 nF 0.1 nF ±(5.0 % of reading + 8 digits) 6 µF 1 nF ±(4.0 % of reading + 5 digits) 60 µF 10 nF 600µF 0.1 µF 1000 µF 1 µF ±(5.0 % of reading + 8 digits) - Overload Protection: 250V DC or rms, AC for all ranges ADP Range Resolution Accuracy 600 mV 0.1 mV ±(3.0 % of reading + 5 digits) Frequency Range Resolution Accuracy 40 Hz 1 Hz ±(0.1 % of reading + 1 digits) 600 Hz 1 Hz 6 kHz 1 Hz 60 kHz 10 Hz 100 kHz 0.1 kHz - Measurement Range: 1V to 10V RMS, 40Hz ~ 100kHz Audible Continuity and Diode Test Range Description Audible Continuity If continuity exists (about less than 40Ω), built-in buzzer will sound Diode Show the approx. Forward Voltage of the diode Standard Set Includes 3 x 1.5V AAA Battery (FREE) 1 x Test Leads (set) 1 x Protective zippered carrying pouch Instruction Manual Standard packaging box     Copyright © 2008. All rights reserved. Discount Instrument *