Digital AC Powered Stroboscope Analyzer w/ Built-in LCD Screen, 220V or 110V ******           This is an essential tool to measure the rotational speed of a rotating object and to inspect the defect on its surface. Capable to provide image of single, two or multiple stillness for the vibration object, rapidly rolling object or a periodic motion object, and can also use to observe the movement tracks. It uses xenon lamp which has a very bright illumination and allows room light operation at long distance and emits an adjustable flash rate. When the rate of the flash equals the velocity of the moving object it appears still and if the speed of the flash is a unit fraction below or above the object's cyclic speed (motion of the object), it appears to move backward or forward, depending on the flash frequency. Both of these can be used to analyze a moving process that is running at high speeds. It features a built in LCD that accurately displays the Flashes Per Minute (FPM) with no guessing errors. It also features dual stage strobe technology that produces strong flash of light at low range and week flash of light at high range to protect the bulb at high flash rates as well as the very stable internal/external trigger switch and external trigger jack for easy operation and synchronization. This trigger switch & jack can be used to trigger external equipment or be triggered by an external equipment. It also equipped with Flash Timer Control that protect the operational life of flash tube,produces a flash range from 50-12,000 Flashes Per Minute.   Special Features Provides image of single stillness, two stillness or multiple stillness for the vibration object, rapidly rolling object or a periodic motion *object, and can also observe the movement tracks Can measure the rotational speed of a rotating object and to inspect the defect on its surface without the need to stop the machine *and to adhere any mark to reflect the light and without the need to contact the object Wide measuring range of 50 to 12,000 FPM with high resolution Can be externally triggered or it can trigger external equipment Equipped with Flash timer that helps in conservation of the flash tube 110V with US Power Plug Allows external triggering device to automatically synchronize with the equipment Features instant results that's clearly & legibly shown on an easy-to-read LCD screen and exact reading with no guessing or errors Approved by strict quality and safety standards that insures DURABILITY for LONG and TROUBLE-FREE life *Brand new and synchronous signal output Standardizations: We keep in mind that the safety of the user should always comes first. We made sure that our products has the CE marking which indicate conformity with the essential health and safety requirements set out in European Directives. Your Safety is Guaranteed while using the product. Specifications Standardization: CE Measurement Range: 50~12,000 FPM Display: 5 digits, 10mm (0.4") LCD Parameters Measured: Flashes per Minute (FPM) Resolution: 0.1 FPM (50~999.9 FPM) , 1 FPM (over 1000 FPM) Accuracy: ±(0.05%n + 1d) Sampling Time: 0.3 second Flash tube life 100 Million Flash Adjust: Coarse adjustment, fine adjustment , ×2 and ÷2 for fast check High & Low Range: Manual Conversion (Flashing light is much brighter at low range than at high range) Flash tube type: Xenon lamp Operating Conditions: 0~40°C temperature , below 85%RH Power Supply: 110V or 220V A.C. Power Cord (either 110V or 220V) Weight: about 1000g Triggering Mode Interior/Exterior External trigger signal input for simultaneous test of measurement Flash tube life 100 million *External trigger level: 3-24V (see the diagram below) ***************   Set Includes 1 x Stroboscope 1 x Spare Flashing Tube Bulb (FREE) 1 x Power Cable Plug Operating Manual Standard Factory Package     Copyright © 2008. All rights reserved. Discount Instrument *