|
A
revolutionary inclinometer provides angle measurement within
±180° (0 ~ 360°) range in wide variety of application.
Unlike
traditional protractors, this protractor has V-groove
bottom plate with 12 strong magnets to firmly
attach to any cylindrical surfaces.
Featuring
large and clear LCD with Backlight and results
always in upright position at any given angle. The alarm
function, when enabled, will beep when the measured angle
is at 0°, 10°, 20°... 90°. The state-of-the-art
sensor and microprocessor circuit provides unsurpassed accuracy
throughout the protractor's 360° range.
In
addition, placing the meter on a reference surface
zero will give a result of the measured angle within
0.1° accuracy. Absolute Angle Measurement test if
the working surface is on the level or not as you would
with a traditional spirit level. It easily checks roof slopes,
picture hangings, fence posts, kitchen benches, roll cage
angles, wheel alignment, road cambers, etc. Works great
with miter and table saws.
Applications:
- Automotive
- Drive
line Measurement
- Race
car wing & chassis adjustment
- Wheel
alignment
- Frame
straightening
- Industrial
- Machine
tool set up
- Lathe
and mill alignment
- Quality
Assurance verification
- Medical
- Range
of motion measurement
- Drive
shaft alignment
- Setup
of precision machines
- Road
or rail-track layout
- Satellite
or aerial alignment
- Drainage
angles and run-off slopes
- Tool
setting on Lathes
- Setting
blade angle of Circular Saws
- Setting
blade angle of Miter Saws
- Setting
work piece angle for milling
- Grader
and tractor work alignment
- Platform
monitoring
- Suitable
for Built wood and metalwork projects
- Create
straight edges when assembling furniture
- Ensure
wallpaper and cornices are level for decoration
- Measuring
and adjusting alignment of sliding carriages and extension
tables to cast saw benches
- Check
drill press table setting, table saw, jointer table,
band saw, jointer fence or band saw table
- Favored
by cabinetmakers & furniture workshops for setting
up machinery such as saw benches, planer thicknesses,
spindle molders and lathes to ensure that they are set
true
Special Features
- Display
remains upright to enable viewing at all angles
- 'V'
groove base plate with 12
built-in magnets
for secure surface attachment on curved surfaces or
cylinders
- Hands
free reading
- Large
and clear LCD display with backlight and 0.1°
resolution
- Audible
alarm for angle (0°, 10°, 20°, 30°, 40°, 50°,
60°, 70°, 80°, 90°)
- Degree
and Percentage of slope in conversion
- Data
hold function; holds measured data
- Quick
& highly accurate and precise measurement
- Measuring
range of 4 x 90° with ±0.1° repeatability
- Compact
size allows you to take it anywhere
- Calibrates
to any reference surface via calibrate button
- Absolute
and relative measurements conversion
- 360°
measurement range allows you to work both horizontal
and vertical planes
- Directly
enter the state of absolute angle measurement every time
you switch it on (even if batteries are changed)
Specifications
- 12
magnets on V-groove base plate
- Measuring
Range: 4 x 90°
- Resolution:
0.1°
- Repeatability:
±0.1°
- Working
Temperature: 0 ~ 40°C
- Relative
Humidity: 40 ~ 80%
- Power
Supply: 3 x 3V CR2032 Battery (included)
- Size:
approx. 158 x 61 x 34mm (6.22'
x 2.40' x 1.34' inch)
- Weight:
548 g
Specifications
- 1
x Digital Protractor
- 3
x 3V CR2032 Batteries (installed)
- 1
x Instruction Manual
- Standard
Factory Package
|
