Manual & Auto Scan Resistance Capacitance Diode Tester for SMD *****           This auto-scan Resistance and Capacitance Tester for SMD precisely & quickly measure small chip components. Capable for manual & automatic ranging system with full-scale range, over range and low battery indicators, diode test, auto power off with last state auto-save and large LCD display with 5999 Max. display. Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify Surface Mounted Device (SMD) than conventional components. This multimeter is an easy way to sort and evaluate loose components and perform on-board measurements and debugging. The precise non-magnetic steel tips can pick, hold and make reliable contact even smallest SMD components and devices already mounted on a board. The probe can also be used to test conventional components with too short wire leads to insert into the test terminals. . Special Features Auto and Manual scan mode for Resistance, Capacitance and Diode Test Continuity check High precision Resistance and Capacitance probe Precise tips for small-size devices With sampling rate of 3 times per second Over range and Low battery indication Auto Power off function with last state auto-save Large LCD display with Maximum reading up to 5999 Ideal tool for Surface Mount Devices (SMD) Ergonomic design with one-hand operation Tested according to European international guidelines and standards (CE marking) Passed IEC1010 set standards with Pollution Degree 2 & Altitude <2000m Specifications Resistance (Manual Mode) Range Resolution Accuracy 300Ω / 600Ω 0.1Ω ±(1.2 % of rdg + 2 digits) 3kΩ / 6kΩ 1Ω 30kΩ / 60kΩ 10Ω 300kΩ / 600kΩ 100Ω 3MΩ / 6MΩ 1kΩ 30MΩ / 60MΩ 10kΩ ±(2.0 % of rdg + 5 digits) Capacitance (Manual Mode) Range Resolution Accuracy 3nF / 6nF 1pF ±(5.0 % of rdg + 5 digits) 30nF / 60nF 10pF ±(3.0 % of rdg + 3 digits) 300nF / 600nF 100pF 3µF / 6µF 1nF 30µF / 60µF 10nF ±(5.0 % of rdg + 3 digits) 300µF / 600µF 100nF 3mF / 6mF 1µF 30mF / 60mF 10µF unspecified Keep two pins of the capacitance in short before measuring Resistance (Auto-scan Mode) Range Accuracy 300Ω ~ 3MΩ ±(1% of rdg + 5digits) 600Ω ~ 6MΩ ±(3% of rdg + 5digits)  Capacitance (Auto-scan Mode) Range Accuracy 3nF ~ 300µF ±(1% of rdg + 5digits) 6nF ~ 600µF ±(3% of rdg + 5digits)  Diode Test (Manual and Auto-scan Mode) Range Description Test Condition 2V Display read approximately forward voltage of diode Forward DC Current approximately 1 mA Reversed DC Voltage: approximately 2.8 V Continuity check (Manual and Auto-scan mode)   The buzzer generates 2 kHz beep whenever the reading is less than 30Ω Environment conditions Pollution degree: 2 Altitude < 2000m Operating temperature: 0~40°C, (<80% RH, non-condensing) Storage temperature: -10~60°C, (<70% RH, battery removed) Temperature Coefficient: 0.1 x (specified accuracy) / °C (<18°C or >28°C) MAX. Voltage between terminals and earth ground: 50V DC or 36V AC rms Sample Rate: 3 times/sec for digital data Display: 5 5/6 digits LCD display with max. reading 5999 Over Range indication: LCD will display "OL" Low battery indication Auto power off if idle for 10min Power supply: 3.0V battery x 2 (included) Dimensions: 181 x 35 x 20mm (L x W x H)  Weight: approx. 65g (battery included) Standard Set Includes 1 x Auto & Manual RC Pen-Type Multimeter 2 x 3V Button Battery (FREE) Quick Start Guide     Copyright © 2008. All rights reserved. Discount Instrument *