|
This high accuracy, waterproof & dustproof
EC/TDS meter is ideal for a wide variety of applications.
It has the advantage of dual-range measurements that displays
EC or TDS and °C or °F simultaneously. This
meter has IP65 waterproof housing & membrane keypad
that is sealed and secured, no water nor dust can enter
inside the meter. The stainless steel temperature probe
for faster and more precise temperature measurement. Conductivity
measurements are temperature dependent, if the temperature
increases conductivity increases. This meter provides Reference
Temperature (also known as Normalization Temperature)
that allows comparison of the obtained conductivity results
at different temperature.
In addition, the meter has a built-in
ATC in which measured values are automatically adjusted
in temperature between 0 ~ 50°C (or 32 ~ 122°F).
Added features includes 6 unit measurements (µS,
mS, ppm, ppt, °C, °F), adjustable TDS factor,
and adjustable temperature coefficient. Easy all push-button
operation with multi-point calibration (one point
per range).
Ideal
for all water quality testing, water purification applications, wastewater regulation,
aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools
& spas, ecology testing, boilers & cooling towers, water treatment and
other applications that require accurate testing of EC and TDS.
Special
Features
- IP65 Waterproof housing with waterproof
membrane keypad
- Displays
Temperature (°F or °C) and Conductivity or TDS at one glance
- Measurement
units: µS, Ms, PPM, ppt, °C, °F
- Selectable °F / °C
- Simple all push-button operations
including calibration
- Data hold, freezes current readings
- Multi-point
calibration, one point per range
- Pen size & compact,
can fit in pocket easily
- Quick response with ±1% high
accuracy
- Easy removal
of air bubbles for more accurate testing (just shake the meter in the solution)
- One
touch calibration only
- Adjustable
- TDS
factor
- Temperature coefficient factor
- Normalization
Temperature (Reference Temperature)
- Comes with moisture-filled cover,
keeps electrode moist while in storage
- Auto
& Manual Ranging
- Low battery indicator
- Auto
power off (sleep mode) with disable feature
- Allow
resetting of parameters and default (reset to factory setting)
- With
over & below the limit value indicator
- Brand New
- Measuring
Range
- Conductivity: 0~1999 µS (based
on 1.00 TDS factor)
Conductivity: 0~19.99
Ms
- TDS: 0~1999 PPM(based on 1.00 TDS
factor)
TDS: 0~19.99 ppt
- Resolution:
1 µS / 1ppm or 0.01mS / 0.01ppt
- Accuracy: ±1%
Full Scale + 1 digit
- Calibration standard range: (0.2~1)
full scale
- Operating temperature: 0~50°C (32°F~122°F)
- Automatic
Temperature Compensation (ATC): 0~50°C
- TDS Factor:
0.4~1.00
- Temperature coefficient: 0~4.0% per °C
- Normalization
temperature: 20°C or 25°C
- Power supply: 4
x 1.5V buttons batteries
- 2 point (Calibration range
is ±40% of factory default parameter)
- Battery
Life: >80 hours continuous use
- Size : 165 x 35
x 32mm
Standard Set Includes
- 1 x Waterproof EC & TDS meter
- 4 x 1.5V Button Battery
- Operations Manual
- Standard Packaging Box
|
