|
This precise digital instrument with switchable LUX and
FC measure in 4 ranges to check the level of
illuminance, the light falling on a surface. Provides useful
features like long life silicon diode to ensure stability
with spectral response filter and fully corrected for the
angular incidence of light. Brightness or light intensity
plays a very essential factor particularly photography.
The obtained data are very useful information in maintaining
the brightness of any environment.
It can detect the brightness (Lux level)
of any environment in the fields of cinematography and scenic
design, in home, horticulture, illumination control, weather
observation, electro-optical sources, industry inspection,
agriculture research and in any kind of stores, hospital,
school, restaurant, hair salon, factories, shops, and etc.
A FREE Rubber Holster is included
to help protect the meter from damage especially from breakage
due to falling from high places or accidental drop.
Special Features
- Removable Protective Silicon Rubber
Holster (Outer Case)
-
Wide
measuring rang: 0.1 ~ 200,000LUX or 0.01 ~ 20,000FC
repeatedly
-
Peak
illuminance level detector
-
Data
hold function for holding measuring values
-
Peak-Hold
function which collects or record the measured values
that can be of use later
-
Auto
zero adjustment
-
Selectable
Lux and FC measuring units
- Corrected for Luminous Efficiency
function
-
Correction
factor need to be manually calculated for non-standard
light sources
-
Short
rise and fall times
-
Separate
Light sensor allows user take measurements at an optimum
position and for convenient testing
-
Typical
battery life : 200 hours if using alkaline battery
-
Measuring Range:
-
200 / 2,000
/ 20,000 and 200,000 Lux (20,000 Lux. range
reading x 10 ; 200,000 Lux range reading x 100)
-
20 / 200 /
2,000 / 20,000FC (20,000FC range reading x
100)
*** 1FC = 10.76Lux ***
- Accuracy: ±3% rdg ±0.5%
f.s. (±5% rdg ±10dgt as > 20,000Lux
or 2,000FC range)
(calibrated to standard incandescent lamp at color temperature
2856K)
- LCD Display : 3-1/2 digits
- Sampling time (Measuring rate): 0.2
times / second
- Photo detector type: Silicon Photo
Diode with Filter
- Repeatability: ±2%
- Temperature Characteristic: ±0.1%
/ °C
- Operating
- Temperature: 0 ~ 40°C (32
~ 104°F)
- Humidity: 0-80% Rh
- Storage
- Temperature: -10 ~ 60°C (14
~ 140°F)
- Humidity: 0-80% Rh
- Over-range indication
- Low power consumption
-
Dimension:
-
photo detector:
100 x 60 x 28mm
-
meter body: 149
x 71 x 41mm
-
photo detector
lead: 150cm
- Power: 1 x 9V Battery
- Typical Battery Life : 200 hours
(alkaline battery)
- Weight: 250g
Set Includes
- 1 x Lux Meter
- 1 x Silicon Rubber Outer Casing
- 1 x 9V battery
- 1 x Instruction Sheet
- Standard factory package
|
