|
Are you the (un)official office or home network cable
guy? Or maybe you just like to make your own Ethernet
patch cables. Either way this Network Cable Tester is
a perfect tool to assist you with your wiring endeavors.
It diagnose cable problems and checks correct pair mapping,
RJ45 connections and overall cable lengths. It quickly
identifies continuity problems such as short circuits,
open wires, reversed pairs, crossed pairs, connection
sequence, jumper or cross-talk interference and miswiring
as well as if there are any breaks in the cable and how
far down the line the break is.
This tester is very easy to operate
for prevent and solve cable installation problem. It can
widely be used for a number of applications such as cable
connection sequence, length, user jumper and cable connection
continuity and determine any open circuit, short circuit,
jumper or cross-talk interference.
Special
Features
- Do
the cable continuity check in a nice and easy way
- Check
wiring error in 5E, 6E, coaxial cable and telephone
line
- Applicable
for open circuit, short circuit, jumper wire, reverse
connection or cross-talk interference
- Find
the location of wiring or connection error
- Measure
cable length and determine the distance of open circuit
and short circuit
- Dynamically
calibrate cable length and make length measurement as
accurate as 97%
- Long
battery life (standby mode for over 50 hours)
- Auto
time delay shut off
- Measure
length and pair with or without far-end recognizer
- Locate
cable and there is 8 far-end passive jacks (Only one
jack is included in this auction)
- Far
end recognizer with prompt voice
- Self
checking function and auto compensate any change in
battery capacity or ambient temperature
- With
CE marking, approved and passed the Europen Standard
for health ans safety
Specifications
- LCD: 4 x 16 characters big LCD screen
- Type of Tester Cable: STP / UTP twin
twisted cable, coaxial cable, telephone line
- Tester Port
- Tester RJ45 master port (M), tester
LOOPBACK RJ45 port (L), far-end recognizer RJ45
port (R)
- The extra BNC and RJ11 converters
are used to measure and check the continuity of
coaxial cable and telephone line
- Length Measurement of Twin Twisted
Cable:
- Scope: 1 to 350M (3 to 1,200 FT)
calibration
- Calibration accuracy: 3% (±0.5m
or ±1.5 ft) (calibrating cable > 5 M)
- Shipment accuracy: 5% (±0.5m or
±1.5 ft) (AMP, AT&T Class 5 cable)
- Unit of Measurement: Display in meter
(M) or feet (FT)
- Length Calibration: User can set self-calibration
factor by a given length cable; The length of calibrating
cable is more than 5M
- Wire Sequence and Locating Cable Error
- Check errors such as open circuit,
short circuit, reverse connection, cross over or cross-talk
interference
- Locating Cable: Included 1 far-end
passive test jack
- Working Ambient Temperature: -10°C
to 60°C
- Automatic Time-delay Shut Off Time:
The tester is idle for 30 minutes
- Uses 4 x AA batteries (not included
in the set)
- Item size: 180 x 80 x 40 mm
A Set Includes
- 1
x Network Cable Tester
- 1
x far-end test jack (ID1)
- 1
x instruction booklet
- Standard
factory box
- OPTIONAL: Phone Adapter
(Not included in the set)
Just add US$6.00, GBP4.00, AU$7.50
or EUR 4,50 to get the phone adaptor
in extra
|
*
