|
This high-precision high quality high accuracy
Sound Level Meter (30 to 130 Decibels) has been designed
to meet the measurement requirement of Safety Engineers,
Health, Industrial Safety offices and Sound Quality control
in various environment.
Great for noise pollution monitoring.
It provides a reliable, accurate and fast
way to measure sound level and calculate the decibel
of factory, office, traffic, home theater setup, health
and safety compliance, vehicle noise testing and audio system.
Also measures both A & C frequencies to get the
right response for the human ear, as well as fast or
slow responses to get an "ambient" reading
or a short noise. It calibrates it self in 3 seconds.
Additionally, it’s extremely easy-to-use.
Just press one button and results will be displayed instantly
on the screen, and simply setting the range, the accurate
decibel can be calculated.
Special
Features
- Designed according to International
Electrician Committee Standard
- IEC 651 TYPE 2
- ANSI S1.4 TYPE 2
- Wild Measurement Range: 30-130dB
- High Accuracy: up to ± 1.5dB
- Windscreen/sponge ball to filter-out unwanted signals
- With Bar graph & Overload Indication
(Over/Under)
- With 2 equivalent weighted sound pressure levels A
and C
- A frequency weighting for general sound level
measurements
- C frequency weighting for checking the low-frequency
content of sounds
- AC & DC analogy signal output are available
connecting to frequency analyzer level recorder, FFT analyzer
and graphic record
- Large LCD screen with digits reading
- Fast and Slow dynamic characteristic mode
- Maximum value hold function to lock up the maximum
reading
- Auto power off design for energy saving
- Dynamic sound level ranges & battery life indication
- Brand new, portable and easy to use
Specifications
- Measuring Level: 30-130dB (A)
, 35-130dB (C)
- Level Ranges:
- 30-80dB
- 50-100dB
- 60-110dB
- 80-130dB
- 30-130dB
- Accuracy: ±1.5dB (under reference conditions)
- Resolution: 0.1dB
- Frequency Range: 31.5Hz to 8.5KHz
- Linearity Range: 50dB/100dB
- Bar Graph
- 50dB scale at 1dB step for monitoring current sound
pressure level
- Sample Rate: 20times/second
- Overload Indication: OVER/UNDER
- Frequency Weighting: A and C
- Digital Display: 4 digits
- Self Calibration Time: 3sec
- AC Signal Output: 0.707Vrms at FS output impedance approx.
600O(ohm)
- DC Signal Output: 10mV/dB, output impedance approx.
100O(ohm)
- Time Weight: FAST / SLOW
- Microphone: 1/2" Electrinic Condenser microphone
- Max hold function: Yes
- Operating Condition: 0~40°C, 10~80%RH
- Storage Condition: -10~60°C, 10~70%RH
- Power Supply: 4 x AA 1.5V alkaline battery (included)
or DC 6V 100mA (maxumim DC9V) (not included)
- Battery Power Life: About 30 hours (alkaline battery)
- Size: 256 x 70 x 35mm
- Weight (Meter with Sponge Ball/Windscreen Filter): 230g
(excluding batteries)
Set
Includes
- 1 x Professional Sound Level Meter
- 1 x Sponge Ball (Windscreen Filter)
- 1 x Output wire cable
- 1 x Operation Manual
- 4 x AA Batteries
|
