|
<< Back
|
GE Busway Spectra Series P4HA10SLI10 26pcs 1000A 600V
Condition: Used
Price: $2,400.00
|
|
Just as we discussed on the text. 26 pcs for $2400. The ends on a couple are a little messed up, but repairable. Its not the actual bus bars that are messed up. I would like to get the sale executed this week. It can be held here for a while if needed, or I can bring it by too when I have a delivery in that area.
Any questions, feel free to call me at 616 747 1802, or email me at [email protected]
Busway Section 13 General General Electric is a world leader in busway manufacturing and design, providing a wide range of busway types available from 30 to 5000 amperes and up to 600 Volts ac. GE busway has many advantages over wire and conduit: —Lower total installed cost. Busway material costs are often equal or less than wire and conduit, and contractors can install busway in a fraction of the time. —Lower life cycle cost. Busway components can be added, deleted, or relocated one month or even many years after the initial installation, saving time and money. —Predictable characteristics. Busway systems conform to common standards. Consultants can use readily published data on busway short-circuit ratings, voltage drop, weights and dimensions in the planning stage of an electrical project. —Can save considerable space in tight electrical closets and existing buildings.
Busway Product Lines —Spectra™ Series…225-5000 amperes —Spectra™ Series LowAmp…225-800 amperes —DH…100 amperes —LW…(Replacement parts only) —LTG…50 amperes, 300 Volts ac/dc —Armor-Clad…(Replacement parts only) —FVA/FVK…225-1000 amperes —LVD/LVDP…(Replacement parts only) —DNSP…(Call GE Energy—Sales Office for information.)
Usage Considerations Busway is not designed for use in highly corrosive atmospheres such as battery rooms or in classified hazardous locations where it could be subject to mechanical damage. Busway is not designed to be embedded in the ground or in concrete and should be used only for exposed work. However, most inspection authorities consider the space above ceiling to be accessible, provided the ceiling panels are readily removable.
Ambient Temperature GE busway is rated based on a 55° hot spot temperature rise over a maximum ambient of 40°C. The busway should be derated for high ambient temperatures.
Thermal Expansion Give consideration to the effects of thermal expansion on busway runs. Compensation for thermal expansion is inherent in DH busway. For other busway types, expansion fittings may be necessary for long straight runs of 150 feet or more, particularly if the busway is not free to move at the ends of the run. The use of an expansion fitting is recommended when the busway run crosses a building expansion joint. Standards There are published standards for all types of low-voltage busway. GE busway conforms to the latest revision of NEMA Standard BU 1, UL standard 857 Federal Specification W-B-811b, CSA. GE busway bears the UL label except where otherwise noted.
High-Frequency Applications GE busway can be used at higher than 60-cycle frequency, but in most cases it is necessary to derate the busway. In most busway, the voltage drop increases at higher frequencies.
Short-Circuit Ratings All busway with a UL label must be marked with a UL listed shortcircuit rating. UL short-circuit ratings apply to “all” busway and associated fittings such as straight lengths, elbows, tees, tap boxes, power takeoffs, and plugs which are necessary for a busway installation. Ratings without a ground bar are established by tests which require the housing and housing joints to provide a satisfactory ground return. The short-circuit rating of fittings with protective devices which are part of the busway, such as power takeoffs and reducers, is equal to the lower of the short-circuit rating of the protective device or the busway with which the fitting is used. For example, a fusible power takeoff rated with 200,000 amperes with Class J fuses when installed on a busway rated 65,000 amperes would have a rating of 65,000 amperes. The short-circuit rating of a busway plug is equal to the short-circuit rating of the fuse or circuit breaker used in the plug. Busway Publications: Spectra™ Series Busway vs. Wire and Conduit
GEA-12111 Spectra™ Series Busway GET-7005E Spectra™ Series Busway Installation Instructions DEH-40087C Spectra™ Series LowAmp Busway GET-8063 Spectra™ Series LowAmp Busway Installation Instructions GEH-6436 Spectra™ Series LowAmp Busway vs. Major Competitive Manufacturers DEC-023 Spectra™ Series LowAmp Busway Fact Sheet DET-103 GE Type DH Plug-In or Feeder Busway GET-9001A GE Type DH Busway Installation Instructions GEH-6437 Spectra™ Series Busway—Short Time Heating Limits GES-9508 Spectra™ Series Busway, 600-5000 Amp Bus Bar Sizing GEZ-7726 Spectra™ Series Busway vs. Major Competitor Manufacturers GEZ-7736 Labor Estimating Manual (Busway) GEZ-7737 Insulation Integrity DE-171 Spectra™ Series Outdoor Busway Installation Video DEV-051A Installation DVD DEV-066 Busway Tool Kit DEU-060
|
Return
I do not accept returns
Shipping
Destination: United States |
---|
|
NONE | Local Pickup | $0.00 | $0.00 | | CUSTOM | Grand Rapids Greater Area Delivery | $10.00 | $10.00 | |
Payment Method
Type | Instructions to Buyer |
---|
Paypal | |
Handling
$0.00(Domestic) $0.00(International)
Insurance
Not Offered (Domestic)
|
|
|