Description:

3/4" thick solid phenolic with cherry wood grain colored Formica material on both sides.  The grain on this sheet is running in the long direction.

Dimensions:  3/4" x 13/5" x 58"
 

About this material:

Solid phenolic is a composite material made by applying heat and
pressure to layers of kraft paper saturated with phenolic resin.  The heat and pressure causes a chemical reaction that transforms the materials into a high-density thermosetting industrial plastic.

Physical Properties

- Very low moisture absorption
- Stable under changes in humidity and temperature changes.
- Scratch and cut resistant.
- Low friction Formica like surface on both sides
- High density
- Resistant to marking or graffiti
 

Cutting, Machining, and Fastening

- Can be cut with woodworking tools using standard carbide tooth saw blades. 
- Machines very well with router cutters leaving a smooth finish with not tear out or chipping.
- Spiral carbide router bits work best. 
- Can be drilled and tapped with standard tooling.
- Can be glued with standard two part epoxy.
- Can use regular woodworking screws in pre drilled holes.  Self tapping screws also work well.

​Typical Uses

- Excellent material for woodworking fixtures where density and stability are critical.
- Router tables, zero clearance table saw inserts, drill press table, dovetail templates, router templates,  router plates, table saw fences, etc.
- Counter and bench top work surface
- CNC machining fixtures
- Laboratory furniture
- Sign making
- Furniture

Note that this material is sold as remnants and drops from an industrial process.  Some sheet can have up to 1/4 of warp over 48".  When cut into smaller sizes the warp is not noticeable.