Product Feature:
Dental Spot Welder for Orthodontics Teeth Repair Heat
Dental Spot welder, is a kind of mechanical that used for the dentistry to remedy and repair the welding of stainless steel wire. It can also be used to heat and form the orthodontic materials. The object of the weld and heat is stainless steel wire of the thickness 0.2-1.8mm.
1、Main characteristics:
1. Adopt microprocessor control system, dependable quality, and high control precision.
2. Adopt nixie tube to show functional mode and power parameter, through membrane key-press to adjust the parameter, its convenient and concise.
3. Good in safety performance have overheating protection, indicator and warning with sub-pressure, overpressure and misoperation.
4. Have memory function of welder parameter, when switch on, automatically shows the same parameters as the last, so that it couldn't adjust parameter at the same condition.
5. Weld electrode can be choosing with different group, adapting the different weldment.
6. Have various functions such as spot welding, braze welding and heat treatment.
2、Main technique parameter:
1. Power supply: 220V±10%, 50HZ±1HZ
2. Power: maximum current 20A
3. Disoperation alarm: when Function mode misfit SET mode, it shows Err beep.
4. Security type: belongs classⅠ, type B
5. Transformer overheating protection: 85℃
6. Capacity regulator: Spot welding (dxx) 1~30
Braze welding (q_x) 1~9
Heat treatment (h_x) 1~9
7. Dimensions of weldment: Ф0.2mm~1.8mm stainless steel wire
8. Fuse: Ф5×20mm, 20A
9. Ambient conditions: temperature 5℃~40℃
relative humidity ≤80%
10. Storage environment: temperature -10℃~55℃
Relative humidity ≤80%
3、Structure:
The left side of front-panel has control panel, and it has top electrode arm in the middle of the front-panel, bottom electrode arm links with welding press pad, right side of front-panel has heat treatment clamp-holder device.
Back of the machine has power switch, fuse holder and foot switch. Foot switch and control panel are parallel connection, it used to start and stop welding, braze welding and heat treatment.
Control panel has mode select button to exchange between welding, braze welding, and heat treatment, and it has state code: dxx means spot welding, q_x means braze welding, h_x means heat treatment. For the working power, it has increasing button and decreasing button for choose.
The top electrode arm have four electrodes, can be rotated to choose the suitable electrode, the bottom electrode arm also have four electrodes, it can be rotated to choose the suitable electrode, so that make up of different sets of electrode suit, to adapt various different welding. Furthermore, the electrode revolves 90° can position automatically at each time.
4、Announcements:
1. Must use the list mutually three-line power supplies, guarantee that the machine's cover connect to the earths, to insure the safety.
2. Put the machine to the dependable place.
3. Use AC stabilized supply, if possible, since it can guarantee the welding power stability, and it can reduce the machine's affection to other electric appliance.
4. The electrode must be rotated with clockwise.
5. Operate under the welding and heating status, according to the operation method, put the status block in correct position and set the status button
correctly, besides, whenever operating in which status, electrodes and backfire poles must output at the same time, so during welding, don't touch
heat treatment poles and vice versa.
6. When the welding power is bigger, or the weld material get in bad touch, prevent the splash thing burn human body, the operator must use the protection glasses and protection gloves.
7. After finish using, wipe the machine clean, then put it at dry and well-ventilated place, and have no causticity air indoor.
8. When the machine breaks down, contact the factory or be fix by the professional personnel in time.
5、The enclosure general chart( packing list)
1) Power cable 1 pc
2) Foot step switch 1 pc
3) Fuse 5 A 2 pcs
