Ten-in-One 3.5" TFT LCD Monitor CCTV Camera PTZ Tester Multi-meter

Smart Design,Top Quality,1-Year Warranty

 

The CCTV testerPRO  STest-894 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video level, controlling PTZ, scanning PTZ address,  generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down.

 

Application:
>>  CCTV system installation and maintenance
>>   Dome camera and All in one camera testing
>>  The CCTV transmitting channel testing
>>   PTZ controller
　

 

FEATURES

>>   3.5"TFT-LCD , 960（H）×240（V）resolution

>>   Digital Multimeter, performs AD/DC Voltage, AC/DC Current, Resistor, Conductivity, Capacitor and Diode test.

>>   DC12V power output

>>   Audio input

>>   Adjustable brightness, contrast, color of LCD

>>   Video Level testing, video signals measured in IRE or mV

>>   Automatically identify and adapt the video mode of NTSC and PAL

>>   Colorbar Video signal generator, transmit/receive colorful images

>>   Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.

>>   PPTZ address scanning, search up the ID of PTZ camera.

>>   Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipment.

>>   Support RS232 and RS485 interface, the rate 150-19200bps

>>   Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection

>>   PTZ(P/L & Zoom) Control: Control the status of P/L, zoom in/out the camera, adjust the aperture, foci and setting parameters, run and call the preset.

>>   Lithium Ion Polymer Batteries(3.7V DC3000mAh), more reliable, and work 15 hours   

>>   Easy for use that the train is almost unnecessary

 

Main Features

1, Video Test 2, PTZ controller 3, Video signal Level Test 4, Color bar Generator 3.5" 960(H) X 240(V) high resolution TFT LCD screen, display video input signal As a controller, it possess full function to Control the PTZ camera, configure PTZ parameter: protocol, baud rate and ID address, pan/tilt speed, setup and call preset position Adjust LCD Brightness, Contrast, Color saturation, Video Format and Video level testing. Output or receive standard color bar signal, testing monitor, cable or other equipment. 5, UTP Cable test 6, RS485 Data Monitor 7, Address search 8, Digital multimeter   Test LAN or telephone cable. the connecting condition and sequence of wires will be displayed, as well as the serial number of the cable tester kit. Capture the protocol from the controlling system and display the command and data. Search The PTZ camera ID Digital Multimeter performs AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance and Diode test, Auto/ Manual Range, Data hold, Relative measuring 9, Audio Test 10, DC12V 1A Output It built-in speaker for audio test Power the camera with DC12V(1A) power output from the tester. It is helpful for demo and testing where there is no power supply available

SPECIFICATIONS
　

MODEL	STest-894 CCTV Security Tester
Video Test
Signal mode	NTSC/PAL (Auto Adjust)
Display	3.5 inch TFT-LCD ,960 x 240 resolution
LCD adjust	Adjustable brightness, contrast, color of LCD
Video IN/OUT	1 channel BNC Input & 1 channel Output
Video Output Mode	1.0 Vp-p
Video Level test
Level test	Video signals measured in IRE or mV
Power Output
Power output	DC12V, 1A
Audio Test
Audio input	1 channel Audio input
PTZ controller
Communication	RS232, RS422 simplex and RS485
PTZ Protocol	Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.customized
Baud Rate	150,300,600,1200,2400,4800,9600,19200bps
Video Signal Generation
Color bar generation	Output 1 channel color bar video signal for testing monitor
UTP CABLE TEST
UTP cable test	Test UTP cable connection state and display in the screen. Read the number of the test box.
PTZ data Capture and display
PTZ Data Test	Capture and Analyze the PTZ data sent from controlling device
PTZ address scanning
PTZ address scan	Search up the ID of PTZ camera
Digital Multimeter
Multi-Meter	Voltage, current, resistance and capacitance measuring, continuity testing, diode testing.
POWER
Power Adapter	DC5V, 2A
Battery	1 pcs Lithium Ion Polymer Batteries, 3.7V DC3000mAh
Rechargeable	4.5 hours recharging time, work for 12 hours
Low Consumption	Sleeping mode, display battery power state
Other Parameters
Work Temperature	-30℃---+70℃
Work Humidity	30%-90%
Dimension/Weight	112mmx189mmx47mm / 500g

 

More Pictures of Item:

Left  view :

12v output for camera

 

Right View :

Side View:

Battery location:

 

Standard Accessories

 

 

 

Additional Accessory ----Bag,It is free now for promotion

 

Additional accessory----Silicon Case,it is free now for promotion