Ten-in-One 3.5" TFT LCD Monitor CCTV Camera PTZ Tester Multi-meter
Smart Design,Top Quality,1-Year Warranty
The CCTV testerPRO STest-894 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video level, controlling PTZ, scanning PTZ address, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down.
Application: >> CCTV system installation and maintenance >> Dome camera and All in one camera testing >> The CCTV transmitting channel testing >> PTZ controller
FEATURES
>> 3.5"TFT-LCD , 960(H)×240(V)resolution
>> Digital Multimeter, performs AD/DC Voltage, AC/DC Current, Resistor, Conductivity, Capacitor and Diode test.
>> DC12V power output
>> Audio input
>> Adjustable brightness, contrast, color of LCD
>> Video Level testing, video signals measured in IRE or mV
>> Automatically identify and adapt the video mode of NTSC and PAL
>> Colorbar Video signal generator, transmit/receive colorful images
>> Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
>> PPTZ address scanning, search up the ID of PTZ camera.
>> Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipment.
>> Support RS232 and RS485 interface, the rate 150-19200bps
>> Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection
>> PTZ(P/L & Zoom) Control: Control the status of P/L, zoom in/out the camera, adjust the aperture, foci and setting parameters, run and call the preset.
>> Lithium Ion Polymer Batteries(3.7V DC3000mAh), more reliable, and work 15 hours
>> Easy for use that the train is almost unnecessary
Main Features |
1, Video Test |
2, PTZ controller |
3, Video signal Level Test |
4, Color bar Generator |
|
|
|
|
3.5" 960(H) X 240(V) high resolution TFT LCD screen, display video input signal |
As a controller, it possess full function to Control the PTZ camera, configure PTZ parameter: protocol, baud rate and ID address, pan/tilt speed, setup and call preset position |
Adjust LCD Brightness, Contrast, Color saturation, Video Format and Video level testing. |
Output or receive standard color bar signal, testing monitor, cable or other equipment. |
5, UTP Cable test |
6, RS485 Data Monitor |
7, Address search |
8, Digital multimeter |
|
|
|
|
Test LAN or telephone cable. the connecting condition and sequence of wires will be displayed, as well as the serial number of the cable tester kit. |
Capture the protocol from the controlling system and display the command and data. |
Search The PTZ camera ID |
Digital Multimeter performs AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance and Diode test, Auto/ Manual Range, Data hold, Relative measuring |
9, Audio Test |
10, DC12V 1A Output |
|
It built-in speaker for audio test |
|
Power the camera with DC12V(1A) power output from the tester. It is helpful for demo and testing where there is no power supply available | |
SPECIFICATIONS
MODEL |
STest-894 CCTV Security Tester |
Video Test |
Signal mode |
NTSC/PAL (Auto Adjust) |
Display |
3.5 inch TFT-LCD ,960 x 240 resolution |
LCD adjust |
Adjustable brightness, contrast, color of LCD |
Video IN/OUT |
1 channel BNC Input & 1 channel Output |
Video Output Mode |
1.0 Vp-p |
Video Level test |
Level test |
Video signals measured in IRE or mV |
Power Output |
Power output |
DC12V, 1A |
Audio Test |
Audio input |
1 channel Audio input |
PTZ controller |
Communication |
RS232, RS422 simplex and RS485 |
PTZ Protocol |
Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.customized |
Baud Rate |
150,300,600,1200,2400,4800,9600,19200bps |
Video Signal Generation |
Color bar generation |
Output 1 channel color bar video signal for testing monitor |
UTP CABLE TEST |
UTP cable test |
Test UTP cable connection state and display in the screen. Read the number of the test box. |
PTZ data Capture and display |
PTZ Data Test |
Capture and Analyze the PTZ data sent from controlling device |
PTZ address scanning |
PTZ address scan |
Search up the ID of PTZ camera |
Digital Multimeter |
Multi-Meter |
Voltage, current, resistance and capacitance measuring, continuity testing, diode testing. |
POWER |
Power Adapter |
DC5V, 2A |
Battery |
1 pcs Lithium Ion Polymer Batteries, 3.7V DC3000mAh |
Rechargeable |
4.5 hours recharging time, work for 12 hours |
Low Consumption |
Sleeping mode, display battery power state |
Other Parameters |
Work Temperature |
-30℃---+70℃ |
Work Humidity |
30%-90% |
Dimension/Weight |
112mmx189mmx47mm / 500g |
More Pictures of Item:
Left view :
12v output for camera
Right View :
Side View:
Battery location:
Standard Accessories
Additional Accessory ----Bag,It is free now for promotion
Additional accessory----Silicon Case,it is free now for promotion
|
|