Blue Point SNAP ON MULTIMATE DIGITAL MULTIMETER MT586
Price: $0.99
This Listing Is For A Used Blue Point By Snap On Multi Mate MT586 Multimeter This Was Just Checked By My Local Snap On Rep And Was Told Everything Checked Out Fine This Auction Includes the Meter And Test Leads Shown In Picture And Nothing Else The Specs For This Tool Are As Follows:
Features: • LCD Display - 20000 count with 42 segment bar graph. • REC (Record Mode) - Store minimum, maximum, and average readings over a measurement period. • RANGE - Manually select the appropriate range. • AC/DC - Manually select AC or DC measurement function. • FUNCTION - Toggle between functions on Ohm, TEMP, and IG modes. • Hz (Frequency) - Measure the frequency of sensors and signals. • OHMS/RESISTANCE - Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring. • High Resolution DCmV Range - Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements. • DCV, ACV (DC Volts, AC Volts) - Measure the voltage of circuits and sensors. Measure the voltage of ABS wheel sensors. • REL (Relative Mode) - Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements. • CYL (Cylinder) - Selects the number of cylinders in IG mode. • HOLD - Lock the reading on the display for hard to read locations for future reference. • PEAK-H (Peak Hold) - Capture signals spikes as fast as 1mS to diagnose intermittent events. • TEMP (Temperature) - Measure temperature with included temperature probe. • AC/DC Current Functions - Measure the parasitic draw from the battery with ignition off. • IP, IG (Automotive Functions) - Measure RPM, Duty, Dwell, mS pulse width, Frequency. • TILT STAND - Is built-in into the instrument housing. • SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labeled with replacement number.
General Specifications Max. Voltage between any Input and Ground: 1000V Fuse Protection mA: 0.5Amp/600VAC Fuse Protection: A: 10Amp/600VAC Display Type Digital: 20,000 count, 4x per second update Display Type Analog: 2 x 41 segments, 20x per second update Operating Temperature: 0° to 40°C (32° to 104°F) Storage Temperature: -10° to 50°C (14° to 122°F) Relative Humidity (0% to 80%): 0° to 35°C (32° to 95°F) Relative Humidity (0% to 70%): 35° to 55°C (95° to 131°F) Temperature Coefficient: 0.1 x (Specified Accuracy) per °C for temperature <18°C to>28°C Power Supply: (1) each 9 volt alkaline battery (pre-installed) Battery Life: 100 hrs. Typical Size (H x L x W): 2.4" x 3.8" x 8.0" (61mm x 97mm x 203mm) Weight: 24 oz. (680g)
We Do NotAccept PayPal !!! We Accept Visa, MasterCard and Discover Cards Through Paymate's Secure Ebay Approved Checkout System.
The Checkout Process Does Not Require Any Sign Up, Just Complete Checkout Process As Normal.