Description:

- Place of Origin: Guangdong China (Mainland)
- Brand Name: QS
- Size: 72*42*23mm
- Output Current: 0.5-5A
- Output Power: 51 - 100W
- Type: DC/DC Converters
- Input Voltage: 5-32V
- Output Voltage: 12-35V
- Model Number: QS-1235CCBA-100W
- Output Type: Other
- No-load current: : Typical
- Load regulation: : ± 2%
- Voltage regulation: : ± 0.5%

- Package Size: 10*10*5(cm)
- Package Weight: 400(g)

                   

Scope of high-power LED driver, car mobile laptop power supply (Before use, adjust the voltage)

Module parameters

Module Properties: non-isolated constant current and voltage can be automatically boost

Input Voltage :5-32V

Output voltage: adjustable (12-35V)

Output current range :0.5-5A (100W MAX) (continuously adjustable)

Output Power: 100W maximum cooling power (input voltage greater than 10V, the input 8V output 60W MAX)

Conversion Efficiency: 92%

Output ripple: 20M bandwidth (for reference)

Operating Temperature: Industrial (-40 Celsius  to +85 Celsius) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation) case surface temperature should not exceed 90 degrees

Full load temperature rise: 40 Celsius 

No-load current: Typical

Load regulation: ± 2%

Voltage regulation: ± 0.5%

Dynamic response speed: 5% 200uS

Short circuit protection: No
Undervoltage protection: No

Input Reverse Polarity Protection: Yes.

Installation: screw (diameter 3 mm), 2 mounting holes, 2 holes spaced 82 mm fixed

Wiring: You can plug terminals, pressure lines, no welding

Shell: All aluminum, casting process, can work in harsh conditions

 

 

Applications

Solar charge regulator, solar fluctuations in voltage can it stabilize to the battery charge and can avoid the battery overshoot.

System-level power supply before, wide pressure buck designed for wide voltage range.

Constant body can give the battery charge, high power LED driver

System before the class, ultra-high efficiency design, environmental protection, small heat, capacity loss.

Can be used for high-power LED driver, battery charger, power supply equipment, etc.,

 
Easy adjustment of voltage and current LED drive methods (for example, 10 string LED current 1. 7A 50W)

1. Module input power output is not connected LED, adjust the CV output voltage to about 34V;

2 CC multi-turn adjustment counterclockwise until you hear potentiometer which sent da da sound (potentiometer has been adjusted to the end);

3. Connect the LED, and the LED anode and cathode output module in series between a current meter (ammeter internal resistance as small as possible, meter connection cable as thick and short, so as not to affect the debugging results);

4. Power, the LED is not lit, or micro-light to observe the ammeter shows the current, slowly clockwise until the ammeter shows about regulating CC 1. 7A.

5. Remove the ammeter, direct power test machine.

 

Packing List:

power supply module*1

 

 

 

Freeshipping F109# Efficiency 92% DC-DC Step-up module Step-up circuit board 5V/3A Ultra-small size US$ 8.45 - US$ 9.48/piece

Freeshipping F110# Constant current Constant voltage Automatic Buck 94% efficiency Car Power Supply Module LED Driver Low Ripple US$ 23.71 - US$ 26.80/piece

F108# Efficient 6-32V to 0.8-28V 150W Notebook Car Power Supply Buck Battery Regulator US$ 52.58 - US$ 58.76/piece

Freeshipping F107# LED Driver Constant Power Modules Charging indication Constant direction CC CV Finished Upgrade US$ 8.25 - US$ 9.79/piece

 

 

Freeshipping F106# Low-ripple DC to DC 4.5-60v turn 1.2-30V 90W adjustable power supply module LM2576HV US$ 11.86 - US$ 13.40/piece

Freeshipping 319# LED power supply Waterproof 6W-12W 12V 3A step-down constant-current LED source driver US$ 20.62 - US$ 21.65/piece

AC/DC Power Adapter S- 150W- 12V ( 5V/12V/24V) LED POWER SUPPLY Output 12V 12.5A US$ 10.31 - US$ 12.37/piece

10PCS/LOT Power Gyroscope LED Power Ball US$ 44.33 - US$ 54.64/lot 10 pieces / lot