Remote Shutter Cord -
100% Compatible with Canon RS-60E3 and Pentax CS-205

Introduction:

This remote cable can be used to trigger the camera shutter up to 1m(3ft) away from any compatible DSLR/SLR camera, such as the EOS 500D, 1000D, 450D, 400D, 350D, Pentax K7, K20D, K200D, K10D, K100D, Samsung GX-20, GX-10, GX-1S, etc. It is electrically parallel to the shutter release button on the camera body, and therefore operates without transferring vibration from the photographer's hand. The lock-down feature is an additional function provided by the RS-1C that is not available on the main camera body.

Condition: Brand New

Item(s) will be sent from Portsmouth, UK

 

Camera support table:

Pentax	Digital	K7	K200D/K100D/K110D	*istDS(2)	*istDL(2)
		K20D/K10D	*istD
	Film	*ist	MZ-6
Samsung	Digital	GX-20	GX-10	GX-1S	GX-1L
Canon	Digital	EOS 500D	EOS 1000D/450D	EOS 400D	EOS 350D/300D
	Film	EOS30/30V/33	EOS50/55

 

Operational Instruction:

Connection
First check the the RS-1C is not locked down. If you see a red line, slide the latch to cover the line and release the lock.
Switch your camera OFF or L, then push the plug of the RS-1C all the way into the socket. If the camera is ON, the shutter
can sometimes fire as the RS-1C is being plugged in or removed.

Release

Setup for your shot by positioning your camera and lens on a tripod, and checking your composition. If you cannot be sure that a subject will be covered by an autofocus point, use manual focus instead. When you are ready to shoot, Switch your camera ON, then use the button on the RS-1C just as you would the shutter button on the camera body. Half-press is usually used for metering and autofcousing, while depressing the button fully releases the shutter.

Lock-Down

For situations where you want to keep the button depressed, such as continuous shooting, or BULB mode exposures, push and hold the release button. Engage the lock by sliding the plastic latch forward, revealing a red line. To unlock, slide the latch to cover the red line.

Technical Specifications:

• Description: electronic cable remote shutter cord (Remote Cord RS-1C)

• Shutter Release: two-level shutter button, slide to lock;

• Cable Length: 1m (3 feet)

• Dimesion: (W x H x L): 29 x 22 x 105mm

• Weight: 30 g

Warranty:
This product comes with 6 month warranty.