Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Water Proof with glass front window.

Only one LED lights at a time to save battery power.

 

Battery Condition Indicator and Hour Meter- Boat, Forklift, Golf Cart or other 96 volt DC battery powered equipment.

 

Description:

 

Combines in one instrument a solid state LED battery state-of-charge indicator and an LCD hour meter.

 

Operating Range:

Hour meter-DC9V～80V

Battery Indicator- DC 96

 

Display

Battery state-of-charge: 10-bar, tri-color LED

Hour meter: 6-digit LCD, 5mm high

 

Resolution

Hour meter: 99,999.9 hours

 

Case specifications

Round, step type bezel, maximum 4 pins, 3/16” terminals, stainless steel U-shape mounting bracket, with washers(2), springs(2) and nuts(2), slip-on connectors(4), isolated sleeves(4).

 

Panel Cutout

52mm, 2-1/16” diameter

 

Temperature

 

Operating:-40℃ to 85℃     

Storage: -50℃ to 90℃

 

Humidity:

maximum95% RH(Non condensing) at 38℃

 

Mechanical Shock:SAE J 1378, 55g

Mechanical Vibration:SAE J 1378, 20g

 

Pins—Maximum 4 pins, battery and hour meter power +&-; hour meter control

 

Operation

 

• The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
• As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
• At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator. Relay will open shutting off power to auxiliary equipment if this function is used.
• At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
• When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

 

LCD Hour Meter:

 

10 LEDs, #10 being fully charged and #1 being fully discharged

1. When connected to power for the first time, hour meter checks itself showing each digit for 1 second,

    and then shows 0.0 to be ready for work.

2. When control pin (4#) is connected to high voltage (DC9V～80V), hour meter begins to

    count hours and time sign (sandglass) flashes at 1Hz.

3. When control pin (4#) is disconnected, hour meter stops counting hours, and shows

    memorized hours.

4. When reset pin (3#) is connected to low voltage (GND), hour meter clears memorized

    hours to begin with new counting.

    When hour meter is completely powered off, memorized hours are kept in EEPROM

    and will be shown next time when it's powered on.

 

Type Table

Type	Work Range Voltage
JCBDIHM-96	96V

Note: Working voltage can be changed with customer's need.

 

If you need other voltage (like12Volt, 24Volt,36Volt,48Volt ,72Volt or other voltage).

We will send it within 2 business days after recieving your payment, we will send by Flat Air Mail. Please allow 5--12 business days for delivery to USA (delivery time is upon your location,),it may take 7 to 25 business days for other countries except for USA.

All the goods will be ship to the address which display in the payal.If your need ship to the other address,please inform,

If need to send quicker using express like Fedex, DHL, UPS,or USPC, or you'd like regist air mail, please contact, we will alter the shipping fees for you. Thanks