This
kit is for use with broken studs and screws, very handy kit if you are
in the building/engineering/plumbing/electricians trade or even the
Home DIYer.
Fluted
extractors give a solid grip on broken studs or screws, ranging from
3/16" to 9/16" (5mm -16mm). Most of the smaller screw sizes can be
removed with this kit. (Refer to the exact sizes below).
Turn broken fasteners out and permit the highest torque without expansion.
Remove broken fasteners without breaking or jamming.
Can be used on thread sizes 5mm to 16mm.
Specifications
Step 1:
Drill Pieces:
1/8" (3.175mm), 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.92), 11/32" (8.73mm)
Drill Guides:
G1 - dia 9/32" (7.14mm) drill 1/8" (3.175mm)
G2 - dia 5/16" (7.94mm) drill 1/8" (3.175mm)
G3 - dia 11/32" (8.73mm) drill 1/8" (3.175mm)
G4 - dia 3/8" (9.53mm) drill 1/8" (3.175mm)
G5 - dia 13/32" (10.32mm) drill 3/16" (4.76mm)
G6 - dia 7/16" (11.11mm) drill 3/16" (4.76mm)
G7 - dia 15/32" (11.91mm) drill 3/16" (4.76mm)
G8 - dia 1/2" (12.70mm) drill 3/16" (4.76mm)
G9 - dia 17/32" (13.49mm) drill 1/4" (6.35mm)
g10 - dia 9/16" (14.29mm) drill 1/4" (6.35mm)
Step 2:
Extractor Pieces:
1/8" (3.175mm), 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.92), 11/32" (8.73mm)
Extractor Guides:
N1 - 1/8" (3.175mm)
N2 - 3/16" (4.76mm)
N3 - 1/4" (6.35mm)
N4 - 5/16" (7.94mm)
N5 - 11/32" (8.73mm)
Complete in blow moulded case
RRP: £69.99
