This a brand new to the market and a completely new design.

Specially made to start induction motors. Induction motors can need up to 4 times their rated
operating power just to start. A drill which has an induction motor of 750w will need up
to 3000w just to start it and 900w to run.

This is can be achieved with its high resistance fully copper wound alternator. All the joints are silver soldered which is one of the highest melting point joint.

New features as follows.

New design pull cord with an easier action and more reliable.

New carburettor for easier starting and more fuel efficient. 9% more efficient.

New design plastic fuel tank. The fuel tank in the model is plastic. A plastic tank does not attract moisture like a conventional metal tank. So no more corrosion from inside out and no more rough running because you have water in the fuel.

New exhaust system. Better quality build and appearance and less dB output.

New design front control panel. Again designed and manufactured form plastic for both safety reasons and appearance. Ergonomic in design and and very user friendly and easy to use.

Specification

• Model: G3000
• Frequency(Hz):50HZ
• Rated AC Output(kW): 2.6
• Max. AC Output(kW):3.0
• Max DC Output: 12v 8.3amps
• Power Factor:1.0
• AC Output Voltage(V): 115/230
• Noise Level LwA dB(A): 96
• Fuel Type: Petrol
• Fuel Tank Capacity(L):15
• Continuous Work(h):12
• Net Weight/Gross Weight(kg): 43/45
• Dimensions ( L x W x H )(mm): 612x460x542
• Engine: FP170
• Engine Type:Four-stroke, Air-cooled, OHV gasoline engine
• Displacement Capacity(cc): 208
• Ignition type: Transistorized Magneto Ignition
• Max. Output( HP / rpm): 7 / 3600
• Lubrication Oil: SAE 10W/30
• Lubrication Oil Volume(L): 0,6Ltr
• Starting System: Recoil
• Spark Plug:F6TC

Examples of some items fitted with induction or capacitance starting:

Appliances or tools with electric motors, air conditioners, microwave ovens,
televisions, fluorescent lights and any other appliances that are not simply resistance
type loads.

This type of appliance (especially those that use electric motors) may require more power to start then is indicated by their running power ratings. It is not possible to select a generator by the power rating information given on the appliance; it is necessary to know both the staring current and running current required.

RRP - £455.00

Extra Postage Areas
 
The post codes below have an extra postage cost by the courier please wait for an invoice before paying if you live in these areas
 
Zone 2. Scottish Highlands and Islands in the following post codes
IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE
 
Zone 3. Northern Ireland with the following post codes BT, IM, TR21-25
 
Zone 4. Southern Ireland and the Channel Islands all post codes.