This professional 4” air angle grinder is perfect for use in the full time workshop or at home.
 
Outputting enough power with its free speed of 11,000 rpm it will give you a good finish on the surface being ground down in no time at all.
 
The parts and motor are of very high quality and with an auxiliary view you'll know where everything goes if you ever need to pull it apart.
 
Equipped with an adjustable position metal guard to keep the operator safe from sparks and pieces of flying metal.
 
NB: All air tools should be oiled on a daily basis. All air lines should be equipped with water trap and dryers. Drain compressors at least one a week.
 
Specifications
 
• Free speed 11,000RPM
• Air hose (I.D) 3/8"
• Air inlet (PT) 1/4"
• Metal guard
• Average air consumption 6CFM (171.6l/Min)
• Working pressure 90PSI (6.3bar)
• Detailed auxiliary view of the grinder
 
Includes
 
• 1 x disc
• 1 x side handle
• 1 x spindles holder
• 1 x spanner

 

 

RRP - £74.99



Extra Postage Areas
 
The post codes below have an extra postage cost by the courier please wait for an invoice before paying if you live in these areas
 
Zone 2. Scottish Highlands and Islands in the following post codes
IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE
 
Zone 3. Northern Ireland with the following post codes BT, IM, TR21-25
 
Zone 4. Southern Ireland and the Channel Islands all post codes.