SP-SMALL 28

* Used for Motorcycle and Multi-Cab 3 Cyl.

HOW DOES IT SAVE FUEL?
The catalyst of SPEED PLUS fuel saving device plus less CO2 Emission combines with the elements in the air to chemically activate the fuel and air mixture rushing into the intake manifold and assist vaporization and distribute this vaporized fuel and air mixture uniformly to all the cylinders of the engine. Moreover, it also converts the unwanted carbon during combustion into usable gases. All these positive chemical reaction results to greater fuel yield of up to 2 to 4 km. per liter of fuel.

HOW DOES IT GIVE ADDITIONAL POWER?
SPEED PLUS Fuel Saving Device is an air regulating device with catalyst uses the elements in the air to fine tune the fuel and air mixture to the stoichiometric ratio (chemically correct 14.7 parts of air to 1 part fuel); thus maximizing vaporization and combustion of the fuel is achieved. However, burst of acceleration and deceleration require constantly changing air to fuel ratio and this is when SPEED PLUS catalyst combustion chemically adjust and help supply exactly the right mixture (lean or rich) at the right time so that the engine can run powerfully and smoothly (up to 20 hp additional)

HOW DOES IT REDUCE POLLUTION?
Because SPEED PLUS is an air regulating device with catalyst to fine tunes the air and fuel mixture to the chemically correct ratio (stoichiometric) and vaporize and distribute this uniformly to all the cylinders, ideal, if not perfect combustion is attained. Thus, unburned fuel and the other main causes of air pollution like carbon monoxide, carbon dioxide and other carbon oxides are minimized if not all together terminated by up to 99%.

HOW DOES IT REDUCE MAINTENANCE COST?
The improved combustion resulting to less pollution also causes the oil in the engine to remain clean for a longer period of time and so does the spark plugs and fuel injectors resulting to reduced wear and tear on the engine due to friction. In addition, the downtime to change oil, replace spark plugs and calibrate the fuel injectors are minimized. All these result to a longer engine life and considerable maintenance savings over a period of time (50% more or less).