We Provide a full-range of professional production equipment and services with emphasis on digital media science in Post Production. International DSM Group can help you build and customize your media technology business network, from individual workstations accessorizing complete broadcast HD and film facility level.
The TVM-4DG multiformat waveform monitor/vectorscope is an easy-to-operate tool for monitoring HD-SDI (1080 and 720) and SD-SDI (525 and 625) signals and is housed in a convenient half-rack scope package. The display can show any one of the following: waveform, vector, picture or Videotek® patented timing display. Hard Travel case and rack mount sold separately.
Specifications
FEATURES
Two passive looping HD/SD-SDI inputs with auto-detection of input format
External reference input accepts blackburst or tri-level sync
Simple operation
On-screen display of picture, waveform, vector or timing
GPI control of input and function selection
Standards supported: SMPTE 292M, SMPTE 259M-C
SPECIFICATIONS Specifications and designs are subject to change without notice
Video Inputs A and B (Digital) 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24,1080p/23.98, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/24, 720p/23.98, 525/59.94 or 625/50 auto-detect Data Rate 1.485 Gb/s, 270 Mb/s auto-detect Level 800 mV, nominal Return Loss =-15 dB, 5 MHz to 1.485 GHz Connectors 4 BNC, Hi-Z looping
Reference Input NTSC/PAL blackburst or composite video, tri-level sync auto-detect (per SMPTE 274M) Signal Level NTSC: blackburst 286 mV pk-pk ± 6 dB PAL: sync and burst 300 mV pk-pk ± 6 dB Tri-level: 600 mV pk-pk ± 3 dB Connectors. 2 BNC, Hi-Z looping Return Loss =-40 dB, 100 kHz to 5 MHz
Control GPI Input selection, function selection, momentary closure Input Impedance 10 k ohms returned to + 5 V Connector 15-pin D-sub female VFLASH Ethernet port for firmware updates
Display General Picture, waveform, vector or timing Waveform YCbCr, RGB, YRGB, Digital as composite Sweep Time Base 1 H, 2 H or 3 H with x1, x5, x10 magnification 1 V, 2 V or 3 V with x1, x5, x10, x25 magnification Waveform Accuracy ± 1% Vector Cr vs. Cb Vector Accuracy ± 1°
Power Requirements Power Input 90 to 260 V AC, 50/60 Hz, nominal
Mechanical Dimensions H x W x D 5.25 x 8.25 x 16.63 in. (13.34 x 21.6 x 42.24 cm)
Environmental Operating Temperature 0° to 50° C Storage Temperature -40° to 65° C Humidity 90% maximum (non-condensing) Operating Altitude To 10,000 ft (3,050 m) above sea level
Standard Accessories Operators manual GPI breakout Please Note, this unit ships standard with US power cord. Specify UK, EURO or Austrailian power cord if needed, when ordering.
Item Condition
NEVER USED BRAND NEW SYSTEM Full Hardware Warranty
Shipping Agreement
Buyer will pay actual shipping costs, including extra for packagingonly if needed. Shipping costs based on weight TBD after auction. Item(s) will be shipped via UPS, FedEx. ( Insured )
Payment Information
Paypal, wire transfer or a cashier check accepted, guarantees immediate shipping upon receipt and verification.
Payment must be received within 3 days of the closing auction,
Terms & Conditions
Please e-mail or call for any questions prior to bidding. 1-714-749-1371 We reserves the right to refuse a winningbid from a buyer with numerous negative feedback. International DSM Group reserves the right to cancel the auction if bid retractions occur during last 24 hours of auction. AVT01