We Provide a full-range of professional production equipment and services with emphasis on digital media science in Post Production. International DSM Group can help you build and customize your media technology business network, from individual workstations accessorizing complete broadcast HD and film facility level.
The ADQ-50 is a low cost, small, desktop sized unit that generates both video and audio cue prompts for use during ADR, Foley, or other post production audio tasks that require precise and repeatable timing or syncing of audio responses to specific video action.
The ADQ-50 overlays a thin white vertical line which sweeps across the screen from left to right. When the line reaches the rightmost side of the screen it meets a vertical white bar, and a square box is flashed for a few frames in the center of the screen. The combination of the disappearing line and the flashing square visually signals the start of the audio event.
In addition, as the line moves across the screen, the ADQ-50 outputs an audio cue pattern consisting of three evenly spaced audio tones, which a fourth tone missing in sync with the flashing square video prompt. The audio prompts also interact with the video display by turning off the sweeping line when the tones sound, permitting use on sound stages or other environments where low or zero volume levels are required.
The ADQ-50 sweep display is triggered in response to a preset SMPTE time code value, a General Purpose Interface ("GPI"), or manually via the "REHEARSE" switch on the front panel. The ADQ can also be controlled from an RS232 serial port using the supplied QMe™ software. The Windows- based QMe™ program allows the user to capture cue times, compile these times into a list, and add comments associated with each event. This list can then be printed, saved, recalled, or sent to the ADQ-50 in the post production session.
Reads SMPTE time code from 1/30th play speed up to 10x play speed.
Simple actuation of the pushbutton MARK switch captures the time code time associated with the cue point.
"MARK"ed time can be trimmed frame-by-frame to the exact point at which the ADR, Foley, or other audio event is to occur.
Automatically "backtimes" the sweep display and audio tone cuing sequences to end with the square video prompt flashed in the center of the screen when the incoming time code coincides with the marked time.
Can also be triggered manually for rehearsal purposes, by RS232 serial data input from a PC, or a "pull- down" GPI input signal.
Event times can be entered manually from a list by using the MARK switches.
Includes Horita QMe™ event list/ control software.
Item Condition
NEVER USED BRAND NEW SYSTEM Full Hardware Warranty
Shipping Agreement
Buyer will pay actual shipping costs, including extra for packagingonly if needed. Shipping costs based on weight TBD after auction. Item(s) will be shipped via UPS, FedEx. ( Insured )
Payment Information
Paypal, wire transfer or a cashier check accepted, guarantees immediate shipping upon receipt and verification.
Payment must be received within 3 days of the closing auction,
Terms & Conditions
Please e-mail or call for any questions prior to bidding. 1-714-749-1371 We reserves the right to refuse a winningbid from a buyer with numerous negative feedback. International DSM Group reserves the right to cancel the auction if bid retractions occur during last 24 hours of auction. AVT01