Description:

This board is brand new in the box, never used except to test. We took it on trade from a good customer who purchased it for a project that didn't materialize.  Comes in the original box with all packing material, instruction manual and software CD (never opened), and power cord.

CREST AUDIO X 20R : Audio Mixer - 12 Mono and 4 Stereo Inputs

CREST AUDIO X 20R FEATURES:
12 mono inputs + 4 stereo inputs, all with mic preamps and individual 48V phantom power switches
100 mm faders on all inputs and Left, Right and Mono (center) outputs, 60 mm faders on the four subgroups
Four-band EQ on all inputs
18 dB per octave high-pass filters on mono input channels
Insert on all inputs, subgroups, aux outs and L, R & M outputs
Six aux buses, selectable pre or post fader in pairs
Auxes 1 & 2 are configured as Level/Pan for stereo operation
XLR L, R & Mono outputs switchable between line and mic level
1/4" TRS and RCA connectors provided on alt output, monitor output and tape input

CREST AUDIO X 20R GENERAL SPECS:
Frequency Response: +0/-1 dB 20Hz-20kHz ref 1 kHz (any input to any output)
THD+N: any output < 0.01% THD 20 Hz - 20kHz@ +15 dBu out
Noise: mic in: better than –128 dBu 20Hz to 20kHz 150 Ohm source, 60 dB gain. Bus Noise: better than -85 dBu
Crosstalk:channel mute > 90 dB, channel routing > 80 dB
channel fader attenuation > 90dB
aux send attenuation > 85 dB
Phase Shift: < +/- 30 degrees, 20Hz to 20kHz – mic-in to main out
Mic-In: XLR 4k Ohm balanced
max voltage gain to main outs = 100 dB
Line In XLR and TRS: > 10k Ohms balanced
RCA Tape Input: > 10k Ohms balanced
Bus Inputs: > 10k Ohms balanced
L/R/M Outputs: XLR 100 Ohms balanced (switchable between line or mic level)
Group/Direct Outputs: TRS 50 Ohms ground compensated
Aux Outputs: XLR & TRS 50 Ohms ground compensated
Headphones: Stereo, intended to drive > 8 Ohms
Dimensions:17.5" height (10u) x 19" width x 4.5" depth behind panel
Weight: 30 lbs
Internal Power Supply: 100 - 240 VAC, 50/60Hz