Product Description

 

 

 

What is included:

One (1) SS-168 W1(315MHz) or SS-168W2 ( 433.92MHz) Smoke Sensor with 9V battery 
1pc User`s Manual with mounting brackets and screws needed for installation. 
All Products are 100% brand new, Unused, Undamaged in its original packaging of unprinted box (non-retail packaging)

 

Description:

Installation:
Choose the areas for installation.
Take the mounting bracket and mark the two mounting holes located on the ceiling or wall. 
Drill two holes in the positions marked. 
Insert two plastic screw anchors into the drilled holes and put the mounting bracket against wall surface.
Insert and tighten mounting screws until mounting bracket is fully fixed. 
Connect 9V DC power (9V battery).
Assemble the back of the detector with the mounting plate. Lock in the position with clockwise turning.
Test the operation of the smoke detector by pressing the test button on the side of the unit.

Operation, Testing and Maintenance:

When the smoke alarm has been installed, the alarm LED should flash approximately once a minute in normal operation. When particles of combustion are sensed, the unit sounds a loud pulsation alarm until the air is clear.
Testing
It is recommended that you test your smoke alarm once a week to ensure the alarm is working correctly. Push and hold test button for approximately 3 seconds. A loud pulsating alarm should sound to indicate the correct function. During the alarm condition, the LED will flash quickly. You can also test it by blowing smoke into the chamber.

Location to Avoid:

Avoid placing in the mouth of door, window or fan for the sensitivity of alarm would be affected. Keep the circulation of fresh air.

In a very humid area or near a bathroom, top building or an area where the temperature may high above 39Cor fall below 5C, the moisture or steam may cause the unit to false alarm.

 

Specification:

Specifications:
Input Power:	9V battery	Standby current:	<=10uA	Alarm Current:	20~50mA
Sensitivity:	According to standard of UL217	Working Temperature:	4C~50C	Ambient Humidity:	10%~90%
Volume:	85dBs	Battery Life:	1year minimum	Wireless frequency :	315MHz or 433.92MHz

 

Shipping &Warranty:

• All orders will be shipped within 1~2 business days after payment and all details confirmed.(Such as input voltage of adapter required etc.) 
  We use DHL, TNT, Fedex, EMS quick express shipping. 
  Generally, batteries for detector, door/window sensor, remoter etc. will be included in package. If there is any limitation of customs clearance for battery, Please note us to deal with it.
• Seller assumes all responsibility for this listing. All products have been checked and packaged in good condition before dispatch. 
  the item is defective, please inform us to replace a new one. And buyer have to pay for the return cost, we pay the cost for resending.
  If you have any questions or issues, please feel free to contact us. Due to different time zone, please allow 12~24 hours to get your e-mail replied.
• 1 year warranty for all security alarm panel and 3 months warranty for accessories. Technical Supports are provided all the time.

 

433.92MHz,16 defence area with keyboard security alarm system,LCD display,Supports ADEMCO CONTACT ID US$ 144.40 - US$ 159.15/set

alarm system with infrared detector,magnetism switch,controller 433.92MHz wireless home/commercial US$ 78.56 - US$ 87.42/set

Support CONTACT ID protocol,Compatible with DTMF, telephone security alarm unit, for home,office use US$ 117.78 - US$ 129.52/set